Crimp Terminal Kits

Crimping is a way of terminating strands of wire in order to connect them to external circuits, using a crimping tool to squeeze a wire hard enough to cold weld it to a given terminal. Crimp terminal kits consist of a crimping tool and various types of terminal.The advantage of crimping is that it forms gas-tight connections, so there is less corrosion of the wire, and the joints are mechanically strong as there is no additional material used, as opposed to soldering.How do crimp terminal kits work?There are broadly three steps to using crimp terminal kits:
  1. Insert the desired terminal into the crimping tool
  2. Insert the wire into the terminal
  3. Squeeze together the handles of the crimping tool to cold weld the terminal onto the wire
Types of crimp terminalCrimp terminals can have different connectors, such as rings, spades, and butt splice terminals, depending on how you want to connect to the external circuit. There are also insulated and non-insulated terminals, depending on your price point and the needs of the circuit. Non-insulated terminals are cheaper but may short in certain environments, whereas insulated terminals protect against this.

...
Read more Read less

Filters

Viewing 21 - 40 of 48 products
Results per page
Description Price Type Connector Type Kit Contents Contact Plating Contact Material
RS Stock No. 398-2264
Mfr. Part No.SK65B
BrandKlauke
£525.12
Each
Units
- Tubular Ring Terminal Ring Tongue 6 50 mm² Tin Plated Copper
RS Stock No. 243-1052
Mfr. Part No.165346
£128.61
Each
Units
PIDG Introduction Service PIDG Splices/Terminals, Plasti-Grip Terminals Case, Flanged Spade, Partition, PG Butt Splice, PIDG Ring Tongue, PIDG Spade, SRS Line Splice Connector, SRS PIDG Faton Receptacle, SRS PIDG Piggyback Faston - -
RS Stock No. 307-7570
Mfr. Part No.AT1HB2
£34.25
Each
Units
Crimp Terminal Storage Case - - - -
RS Stock No. 669-3661
Mfr. Part No.0 376 39
BrandLegrand
£280.85
Each
Units
- - (1) Starfix Crimping Tool, (120) 0.5 mm² Ferrules, (120) 0.75 mm² Ferrules, (200) 2.5 mm² Ferrules, (240) 1 mm² Ferrules, (320) 1.5 mm² Ferrules - -
RS Stock No. 374-4315
Mfr. Part No.H-BOX 4,0-16,0QMM DIN -9025400000
BrandWeidmuller
£23.06
Each
Units
- Bootlace Ferrule 4mm² 16mm² Wire End Ferrules - -
RS Stock No. 243-1046
Mfr. Part No.165430
£180.32
Each
Units
- Plasti-Grip Terminals and Splices Butt Splice, Closed End Connector, Piggyback, Pin, Receptacle, Ring, Spade - -
RS Stock No. 278-9395
Mfr. Part No.142945-1
£212.47
Each
Units
- Plasti-Grip Terminals and Splices Clip, Connection, Fork, Round Terminal - -
RS Stock No. 413-2684
Mfr. Part No.ST11B
BrandKlauke
£26.69
Each
Units
- Bootlace Ferrule 0.5mm² 2.5mm² Wire End Ferrules - -
RS Stock No. 414-6841
Mfr. Part No.H-BOX 4,0-16,0QMM -9025920000
BrandWeidmuller
£27.47
Each
Units
German Colour Coded Bootlace Ferrule - - -
RS Stock No. 413-2713
Mfr. Part No.ST15B
BrandKlauke
£20.38
Each
Units
- Bootlace Ferrule - - -
RS Stock No. 220-6216
Mfr. Part No.06490820000
BrandSES
£24.70
Each
Units
- Bootlace Ferrule Ferrules of 10 mm² x 20, Ferrules of 16 mm² x 10, Ferrules of 4 mm² x 50, Ferrules of 6 mm² x 20 - -
RS Stock No. 413-2662
Mfr. Part No.ST1B
BrandKlauke
£26.69
Each
Units
- Bootlace Ferrule - - -
RS Stock No. 414-6633
Mfr. Part No.725929
£126.99
Each
Units
Automotive Service PIDG Splices/Terminals, Plasti-Grip Terminals Butt Splice, Electrotap, Female Bullet, Male Bullet, Male Receptacle, Piggyback, Pin, Receptacle, Ring, Superchamp II Tool - -
RS Stock No. 602-8149
Mfr. Part No.RS-KT-HO
BrandJST
£91.39
1 Kit
Kit(s)
- Ring Tongue Terminal 0.5-3, R1.25-3.5, R1.25-4, R2-3.5, R2-4, R5.5-5, R5.5-6, R8-6, R8-8 - -
RS Stock No. 848-0902
Mfr. Part No.K2-PVKITY
BrandPanduit
£408.62
Each
Units
- Insulated Terminal (1) CT-260 Installation Tool, (1) K-1001 Steel Kit Box, (100) DNF18-250 Disconnects, (100) DV14-250B Disconnects, (100) PLT2S Cable Ties, (100) PV14-10R Ring Terminals, (100) PV14-8LF Locking Fork Terminals, (100) PV18-610R Multi-Stud Terminals, (100) PV18-6LF Locking Fork Terminals, (100) PV18-8F Fork Terminals, (15) JN314-412 Wire Joints, (25) BSV10X Butt Splices, (30) JN224-318 Wire Joints, (50) BSV14X Butt Splices, (50) BSV18X Butt Splices, (50) DV10-250 Disconnects, (50) PV10-10LF Locking Fork Terminals, (50) PV10-10R Ring Terminals, and (1) PMD-0-9 Marking Dispenser and Tape - -
RS Stock No. 413-2690
Mfr. Part No.ST12B
BrandKlauke
£21.09
Each
Units
- Bootlace Ferrule - - -
RS Stock No. 837-7418
Mfr. Part No.STK-1
Brand3M
£222.56
Each
Units
- Insulated Terminal 3M Cable Ties 06225 (100), 3M Cable Ties 06226 (100), 3M Highland Block Fork Terminals BFV14-10 (50), 3M Highland Block Fork Terminals BFV14-8 (50), 3M Highland Block Fork Terminals BFV18-6 (50), 3M Highland Block Fork Terminals BFV18-8 (50), 3M Highland Butt Connectors BSV10 (25), 3M Highland Butt Connectors BSV14 (50), 3M Highland Butt Connectors BSV18 (50), 3M Highland Female Disconnects FDV14-250 (50), 3M Highland Ring Tongue Terminal RV10-10 (25), 3M Highland Ring Tongue Terminal RV14-10 (50), 3M Highland Ring Tongue Terminal RV14-6 (50), 3M Highland Ring Tongue Terminal RV14-8 (50), 3M Highland Ring Tongue Terminal RV18-6 (50), 3M Highland Ring Tongue Terminal RV18-8 (50), 3M ScotchCode Tape Dispenser STD-0-9 (1), Scotchlok Crimping Tool TH-440 (1) - -
RS Stock No. 803-4304
Mfr. Part No.1202072
£614.66
Each
Units
Crimp Terminal Ferrule 4-10 GY x 200, AI 0,75-8 GY x 500, AI 0.25-6 YE x 500, AI 0.34-6 TQ x 500, AI 0.5-8 WH x 500, AI 1,5-8 BK x 500, AI 1-8 RD x 500, AI 2.5-8 BU x 300, AI 6-12 YE x 100, Crimpfox 6T x 1, Quick Wirefox 6 x 1 - -
RS Stock No. 413-2678
Mfr. Part No.ST2B
BrandKlauke
£22.42
Each
Units
- Bootlace Ferrule - - -
RS Stock No. 175-6754
Mfr. Part No.725972-0
£43.29
Each
Units
Repair Insulated Terminal Butt Splice, Closed End Connector, Piggyback, Pin, Receptacle, Ring, Spade, Superchamp II Tool - -
Related Products
A range of insulated bootlace wire ferrules made ...
Description:
A range of insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with a colour range that conforms to DIN 46228-4: 1990-09. These insulated bootlace wire ferrules are available with twin wire entries enabling two conductors to be crimped in one ferrule.Stock number ...
A range of french colour coded insulated bootlace ...
Description:
A range of french colour coded insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with dimensions that conform to DIN 46228-4: 1990-09 and color coding to french standard NF C 63-023: 1994-02.For suitable hand crimp tools see stock numbers 803-4405, 803-4427 and ...
AI-TWIN Series Insulated TWIN Bootlace Wire Ferrules for ...
Description:
AI-TWIN Series Insulated TWIN Bootlace Wire Ferrules for crimping 2 conductors. These TWIN Bootlace Wire Ferrules are made from tin plated copper with a polypropylene plastic sleeve.For suitable hand crimp tools see stock numbers 803-4310, 803-4313 and 803-4405 typically.
A range of insulated bootlace wire ferrules made ...
Description:
A range of insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with a colour range that conforms to DIN 46228-4: 1990-09. These insulated bootlace wire ferrules are available with twin wire entries enabling two conductors to be crimped in one ferrule.Stock number ...