Distribution Blocks

The primary function of a distribution block is to supply power more efficiently to a series of devices. The secondary function is to isolate short circuit incidents to prevent the complete shutdown from occurring. Distribution blocks can handle a range of frequencies and currents. Using distribution blocks requires only one large wire on the input side to link each connected device back to the power source. This eliminates the need for separate wiring of each device.


What are distribution blocks used for?


Distribution blocks are used in various industries:



  • Heating/cooling for operating heaters, cooling systems and ventilation equipment.

  • Power distribution control in the form of voltage transformers, uninterrupted power supply units and distribution cabinets

  • Solar, wind and turbine as the power supply to distribute energy.

  • Electrical vehicles for charging stations.

  • Electronic automation, including elevators, lifting equipment and conveyor systems.


Types of distribution blocks


The two main types of distribution block are:


• Bussed (enclosed) blocks, which allow for a larger input cable to be split out into smaller cables for branch circuits.


• Independent blocks, which enable multiple individual circuits to be routed to a single location as they are not connected to each other.


...
Read more Read less

Filters

Viewing 861 - 880 of 897 products
Results per page
Description Price Number of Ways Termination Method Wire Size Housing Material IP Rating Current Rating Voltage Rating Cable CSA Length Width Height Colour Maximum Operating Temperature Minimum Operating Temperature
New
RS Stock No. 201-5368
Mfr. Part No.1046949
£7.067
Each (In a Pack of 20)
Units
18 Push In 14 AWG Polyamide IP20 17.5A 500 V 2.5mm² - - - Grey - -
New
RS Stock No. 201-6165
Mfr. Part No.3274139
£5.404
Each (In a Pack of 8)
Units
12 Push In 12 AWG Polyamide IP20 24A 690 V 4mm² - - - Pink - -
New
RS Stock No. 201-4144
Mfr. Part No.3273488
£6.131
Each (In a Pack of 8)
Units
13 Push In 26 to 12 AWG Polyamide IP20 24A 450 V 0.14 → 4mm² - - - Yellow - -
New
RS Stock No. 201-6461
Mfr. Part No.3273664
£3.761
Each (In a Pack of 10)
Units
6 Push In 24 to 10 AWG Polyamide IP20 32A 800 V 0.2 → 6mm² - - - Yellow - -
New
RS Stock No. 201-5664
Mfr. Part No.3273736
£4.749
Each (In a Pack of 8)
Units
7 Push In 24 to 10 AWG Polyamide IP20 32A 450 V 0.2 → 6mm² - - - White - -
New
RS Stock No. 201-4373
Mfr. Part No.3273962
£6.651
Each (In a Pack of 8)
Units
12 Push In 10 AWG Polyamide IP20 32A 450 V 6mm² - - - Orange - -
New
RS Stock No. 201-4201
Mfr. Part No.3273708
£9.541
Each (In a Pack of 8)
Units
18 Push In 24 to 10 AWG Polyamide IP20 32A 800 V 0.2 → 6mm² - - - Yellow - -
New
RS Stock No. 201-5609
Mfr. Part No.3273083
£3.865
Each (In a Pack of 10)
Units
7 Push In 12 AWG Polyamide IP20 24A 690 V 4mm² - - - Pink - -
New
RS Stock No. 201-4060
Mfr. Part No.1047435
£7.552
Each (In a Pack of 20)
Units
19 Push In 14 AWG Polyamide IP20 17.5A 450 V 2.5mm² - - - Yellow - -
New
RS Stock No. 201-5707
Mfr. Part No.1047473
£2.551
Each (In a Pack of 20)
Units
7 Push In 14 AWG Polyamide IP20 17.5A 450 V 2.5mm² - - - White - -
New
RS Stock No. 201-5894
Mfr. Part No.3002804
£7.067
Each (In a Pack of 20)
Units
18 Push In 14 AWG Polyamide IP20 17.5A 450 V 2.5mm² - - - Grey - -
New
RS Stock No. 201-5574
Mfr. Part No.2903603
£112.03
Each
Units
2 - 14 AWG Polyamide IP20 6.3A 250 V 0.14 → 2.5mm² - - - Grey - -
New
RS Stock No. 201-6679
Mfr. Part No.3273934
£3.761
Each (In a Pack of 10)
Units
6 Push In 10 AWG Polyamide IP20 32A 450 V 6mm² - - - White - -
New
RS Stock No. 201-6454
Mfr. Part No.3273630
£7.639
Each (In a Pack of 8)
Units
13 Push In 24 to 10 AWG Polyamide IP20 32A 800 V 0.2 → 6mm² - - - Violet - -
New
RS Stock No. 201-6667
Mfr. Part No.3274028
£7.639
Each (In a Pack of 8)
Units
13 Push In 10 AWG Polyamide IP20 32A 450 V 6mm² - - - Orange - -
RS Stock No. 138-3502
Mfr. Part No.1561670000
BrandWeidmuller
£11.146
Each (In a Pack of 5)
Units
2 Screw 12 → 2 AWG Wemid - 202A 1 kV ac/dc, 600 V 25 mm², 35 mm² 22.2mm 49.3mm 55.4mm Green +130°C -50°C
New
RS Stock No. 201-6247
Mfr. Part No.2903783
£56.20
Each
Units
1 - 14 AWG Polyamide IP20 2A 25 V 0.14 → 2.5mm² - - - Grey - -
New
RS Stock No. 201-5163
Mfr. Part No.3273512
£8.399
Each (In a Pack of 8)
Units
19 Push In 26 to 12 AWG Polyamide IP20 24A 450 V 0.14 → 4mm² - - - Green - -
New
RS Stock No. 201-5841
Mfr. Part No.3273972
£9.541
Each (In a Pack of 8)
Units
18 Push In 10 AWG Polyamide IP20 32A 450 V 6mm² - - - Black - -
New
RS Stock No. 201-6719
Mfr. Part No.3273522
£8.399
Each (In a Pack of 8)
Units
19 Push In 26 to 12 AWG Polyamide IP20 24A 450 V 0.14 → 4mm² - - - Orange - -
Related Products
ABB DBL modular distribution terminal blocks for installation ...
Description:
ABB DBL modular distribution terminal blocks for installation on modular blocks. Either plate or DIN rail mounted. DBL Series Distribution Terminal Blocks. DBL Series.
Range of W series (WPD) distribution blocks from ...
Description:
Range of W series (WPD) distribution blocks from Weidmuller. These distribution blocks range from 0.05 mm² to 300 mm² allowing you to have diverse options for your application. The WPD series distribution blocks are housed with Wemid for increased safety and performance. You are able to safely and efficiently distribute ...
The Phoenix Contact modular power distribution board with ...
Description:
The Phoenix Contact modular power distribution board with Crosslink interface has touch-proof and protection against polarity reversal. Its width is 225mm and height is 160mm. Rated surge voltage is 6k VIts depth is 45.1 mm.
The Phoenix modular power distribution board with crosslink ...
Description:
The Phoenix modular power distribution board with crosslink interface,3 position and touch-proof and protection against polarity reversal. Its width is 405mm. Its height is 160mm Rated surge voltage is 6kV.