Honeywell BZV6 Series Plunger Limit Switch, NO/NC, IP66, SPDT, Die Cast Zinc Housing, 600V ac Max, 15A Max
- RS Stock No.:
- 808-7538
- Mfr. Part No.:
- BZV6-2RN
- Brand:
- Honeywell
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£92.26
(exc. VAT)
£110.71
(inc. VAT)
- RS Stock No.:
- 808-7538
- Mfr. Part No.:
- BZV6-2RN
- Brand:
- Honeywell
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Honeywell | |
| Actuator Type | Plunger | |
| Pole and Throw Configuration | SPDT | |
| Normal State Configuration | NO/NC | |
| IP Rating | IP66 | |
| Maximum Current | 15A | |
| Housing Material | Die Cast Zinc | |
| Maximum AC Voltage | 600V | |
| Maximum DC Voltage | 250V | |
| Connection Type | 1/2 in NPT | |
| Series | BZV6 | |
| Action Type | Snap Action | |
| Length | 69.34mm | |
| Maximum Operating Temperature | +71°C | |
| Width | 44.45mm | |
| Depth | 54.48mm | |
| Minimum Operating Temperature | -32°C | |
| Mounting Orientation | Vertical | |
Select all | ||
|---|---|---|
Brand Honeywell | ||
Actuator Type Plunger | ||
Pole and Throw Configuration SPDT | ||
Normal State Configuration NO/NC | ||
IP Rating IP66 | ||
Maximum Current 15A | ||
Housing Material Die Cast Zinc | ||
Maximum AC Voltage 600V | ||
Maximum DC Voltage 250V | ||
Connection Type 1/2 in NPT | ||
Series BZV6 | ||
Action Type Snap Action | ||
Length 69.34mm | ||
Maximum Operating Temperature +71°C | ||
Width 44.45mm | ||
Depth 54.48mm | ||
Minimum Operating Temperature -32°C | ||
Mounting Orientation Vertical | ||
- COO (Country of Origin):
- US
BZV6 Medium Duty Limit Switches
The BZV6 limit switch series from Honeywell is designed for use within a medium duty environment. The switches are offered with or without actuator seal boots. Both have a combination insulator/seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on side mount switches. Removal of the bottom enclosure exposes the terminals for easy wiring.
Zinc die-cast housing
Approvals
UL, CSA.