The CEL roboxdual 3D printer is an update to the original Robox. It comes with two headLock compatible heads allowing you to print in two different materials and colours, or different support material to the main part. The roboxdual printer has a heated bed and uses advanced automaker software that provides good control and flexibility of overprint settings. The locking safety door quarantines the part during printing and provides a controlled environment. It is a micro-manufacturing platform. The precise positioning of the 3-axis system, along with the mechanical and electronic design of the headLock system, provides a robust framework to build a range of manipulators and scanning devices allowing this robot, in a box, to do much more than just create 3D prints.

Fused Filament Fabrication (FFF)
Standard layer resolution 200 microns / 0.2 mm
Position precision for XY axis is XY: 7.5 microns / 0.0075 mm and for Z axis is 0.15625 microns / 0.00015625 mm
Model Materials are PLA, ABS, PETG, PC & Nylon
Build size is 210 x 150 x 100 mm
Support Materials are PolySupport & HIPS
Automatic material recognition with no setup required
Compatible with 3rd party filament - no vendor lock-in
Fully automatic bed levelling and easy calibration
Hassle-free build plate with no glue or tape required
Needle valves ensure only desired material is printed
Rapid head (<1min) and bed(<4mins) heat-up times
Stainless steel frame and injection moulded housing

3D printing
Industrial use