John Drummond DRUMTL10, LED Voltage tester, 500V ac/dc, Mains Powered, CAT III 1000V
- RS Stock No.:
- 706-8573
- Mfr. Part No.:
- MTL10
- Brand:
- John Drummond
Subtotal (1 unit)*
£87.71
(exc. VAT)
£105.25
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- 16 unit(s) ready to ship
- Plus 4 unit(s) shipping from 14 November 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £87.71 |
*price indicative
Calibration Options:
- Calibration Type:
- RSCAL
- RS Stock No.
- 706-8707
Each
£129.71
(exc. VAT)
£155.65
(inc. VAT)
- RS Stock No.:
- 706-8573
- Mfr. Part No.:
- MTL10
- Brand:
- John Drummond
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | John Drummond | |
| Maximum Voltage | 500V ac/dc | |
| Safety Category | CAT III 1000 V, CAT IV 600V | |
| Display Type | LED | |
| IP Rating | IP67 | |
| Power Source | Mains | |
| Dimensions | 213 x 112 x 72mm | |
| Weight | 320g | |
| Height | 72mm | |
| Length | 213mm | |
| Maximum Operating Temperature | +55°C | |
| Safety Category Voltage | 600 V, 1000 V | |
| Model Number p | DRUMTL10 | |
| Minimum Operating Temperature | -10°C | |
| Width | 112mm | |
| Safety Category Level | CAT III, CAT IV | |
Select all | ||
|---|---|---|
Brand John Drummond | ||
Maximum Voltage 500V ac/dc | ||
Safety Category CAT III 1000 V, CAT IV 600V | ||
Display Type LED | ||
IP Rating IP67 | ||
Power Source Mains | ||
Dimensions 213 x 112 x 72mm | ||
Weight 320g | ||
Height 72mm | ||
Length 213mm | ||
Maximum Operating Temperature +55°C | ||
Safety Category Voltage 600 V, 1000 V | ||
Model Number p DRUMTL10 | ||
Minimum Operating Temperature -10°C | ||
Width 112mm | ||
Safety Category Level CAT III, CAT IV | ||
RoHS Status: Not Applicable
- COO (Country of Origin):
- PH
Drummond Test Lamps MTL10
Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required
Caution
Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.
Supplied with
Carry case, right angled probe tip, two straight tips and instructions
Caution
Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit
Mains Voltage Indicators - Contact