MAX40658ETA+ Maxim Integrated, Transimpedance Amplifier 3.3 V 3-Channel Differential 360MHz 8-Pin TDFN

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The MAX40658 and MAX40659 are transimpedance amplifiers for optical distance measurement receivers for LiDAR applications. Low noise, high gain, low group delay, and fast recovery from overload make these parts ideal for distance-measurement applications.
Important features include 45nARMS input-referred noise, an internal 100mA clamp, 18kΩ (MAX40658) and 36kΩ (MAX40659) transimpedance, and greater than 360MHz bandwidth. An offset input allows adjustment of input offset current. Operating from a +3.3V supply, the MAX40658 and MAX40659 consume only 70mW.
The MAX40658 and MAX40659 are available in a 3mm x 3mm, 8-pin TDFN package or bare die, and are specified over the -40°C to 85°C operating temperature range.

45nARMS Noise
Two Transimpedance Values Available
18kΩ (MAX40658)
36kΩ (MAX40659)
360MHz Minimum Bandwidth
Internal Clamp For Input Current Up To 100mA
Offset Adjust Input
70mW Power Dissipation
3.3V Operation
Applications
Autonomous Driving Systems
Industrial Safety Systems
LIDAR Receivers
Optical Distance Measurement

Specifications
Attribute Value
Power Supply Type Single
Typical Single Supply Voltage 3.3 V
Number of Channels per Chip 3
Output Type Differential
Typical Gain Bandwidth Product 360MHz
Mounting Type Surface Mount
Package Type TDFN
Pin Count 8
Dimensions 3.1 x 3.1 x 0.75mm
Height 0.75mm
Length 3.1mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 3.1mm
195 In stock - FREE next working day delivery available
Price Each (In a Pack of 5)
£ 2.712
(exc. VAT)
£ 3.254
(inc. VAT)
Units
Per unit
Per Pack*
5 - 5
£2.712
£13.56
10 - 20
£2.506
£12.53
25 +
£2.374
£11.87
*price indicative
Packaging Options:
Related Products
The Broadcom fibre optic (FO) AFBR series 50MBd ...
Description:
The Broadcom fibre optic (FO) AFBR series 50MBd data rate, through-hole mount, 8 pins transceiver. It is short link cost-effective galvanic isolation device capable of suppressing up to 27KV of transient peak voltage on a single PCB. Based on 650nm fibre optic technology, the device is suitable for high transient ...
The SFP transceiver provides system designers the ability ...
Description:
The SFP transceiver provides system designers the ability to implement DC-50 MBaud data transmission over 2 km with (62.5 μm/125 μm) multimode fibers. The transceiver supports LC duplex connector and is lead free, Ro HS compliant. Using the 2-wire serial interface defined in the SFF-8472 MSA, the AFBR‑57B4APZ provides real-time ...
Internal Precision Resistors for Closed-Loop Gains of +2 ...
Description:
Internal Precision Resistors for Closed-Loop Gains of +2 or -1High Speed:200MHz -3dB Bandwidth30MHz 0.1dB Gain Flatness (6MHz min)600V/μs Slew Rate Single 3.3V/5.0V Operation Outputs Swing Rail-to-Rail Input Voltage Range Extends Beyond VEELow Differential Gain/Phase: 0.04%/0.02°Low Distortion at 5MHz:-78d Bc Spurious-Free Dynamic Range-75dB Total Harmonic Distortion High Output Drive: ±120m ALow, ...
Switch Phantom Power-On/-Off Under μC Control Precision Adjustable ...
Description:
Switch Phantom Power-On/-Off Under μC Control Precision Adjustable Current Limit300mA (max), TA = +105°C500mA (max), TA = +85°C (MAX16946 in SW Mode Only) Regulated Output Voltage (MAX16946)—8.5V Fixed or Adjustable Between 3.3V and 15VCurrent Measurement Analog Voltage Output Detect Open-Load and Short-Circuit Conditions Provide Open-Drain Fault Signals (Active-Low SC and ...