375 Series End Cover for use with Terminal Blocks

  • RS Stock No. 818-0369
  • Mfr. Part No. 0 375 86
  • Brand Legrand
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): RO
Product Details

Viking 3 Feed-Through Connections

Screw-connection terminal blocks ensure an electrical connection between 2 solid-centre or flexible conductors.

Grey for standard circuits and blue for neutral conductors.
One junction (1 input / 1 output).

Specifications
Attribute Value
Accessory Type End Cover
For Use With Terminal Block
Series 375 Series
70 In stock for delivery within 1 working days
Price Each (In a Pack of 5)
£ 0.472
(exc. VAT)
£ 0.566
(inc. VAT)
Units
Per unit
Per Pack*
5 +
£0.472
£2.36
*price indicative
Not available for guaranteed pre 9am/10am delivery
Related Products
Zinc-plated and passivated steel inserts All contacts on ...
Description:
Zinc-plated and passivated steel inserts All contacts on any one pole are commoned. Nylon body material Mounts direct to flat surface (including metal base) or to miniature DIN rail (stock no. 467-349)The tab/tab type has three 6.3 mm ( in.) tabs on each side. Suitable crimp connectors are available (see ...
This standard, empty EG 45 mm housing is ...
Description:
This standard, empty EG 45 mm housing is designed to receive a wide variety of professional industrial electronic equipment.It can be rapidly mounted by latching onto the symmetrical profile in accordance with EN 50022.In addition, the box has a red locking post assembly towards the rear.Many instructional resources are available ...
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. Standard Terminals, End Covers, and Jumper Bars. SAK Series.
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 ...
Description:
Accepting standard 20x5mm (max. 6.3A) and 1/4 x1 1/4 in. (max. 10A) fuses, these terminals have a pivot top so that the fuses can be isolated, and then removed or tested in situ.,For end protection, an end cover for the lower half of the terminal is required and a fuse ...