Maxim Integrated DS18B20+, Temperature Sensor -55 → +125 °C ±0.5°C 1-Wire, 3-Pin TO-92

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PL
Product Details

DS1820/1822/1825 1-Wire Digital Thermometer & Thermostat

The DS1820/1822/1825 devices are temperature-to-digital converters with over/under-temperature detection. They feature a 1-Wire communication interface and powered from that data line. Applications include PCs, mobile phones, office equipment and data loggers.

Measurement temperature range: -55 to +125°C
Conversion Time (Max): 93.75 ms (9-bit), 750 ms (12-bit)
Unique 64-bit serial code stored in on-chip ROM
Power supply: +3.0 V to +5.5 VDC or from data line

The Maxim DS18B20 is a digital thermometer within a 3-pin TO-92 package. This device integrates both the temperature sensor and EEPROM into one package, saving space on your PCB.
The DS18B20 utilises 1-Wire® technology, meaning it only requires one data line for communication with a microprocessor, plus the ground (GND). It also offers “parasite power” mode, meaning it takes power directly from this data line, so you don’t need an extra power supply. Not only that, you can add as many DS18B20 devices to a single microprocessor through the same 1-Wire bus. Each DS18B20 device features a unique 64-bit serial code on board to help this.

Alarm function:
The DS18B20 offers flexibility with a non-volatile upper and lower trigger point on the alarm function. It is able to identify each device with temperatures outside of your chosen limits.

What temperatures can the DS18B20 measure?
The DS18B20 measures temperatures from -55°C to +125°C. It has a programmable resolution from 9 to 12 Bits.

Where is it used?
HVAC environmental controls
Thermostatic controls
Temperature monitoring systems
Industrial systems
Consumer products
Thermometers
Thermally sensitive systems

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

Temperature & Humidity Sensors, Maxim Integrated

Specifications
Attribute Value
Sensor Function Temperature
Output Type Digital
Interface Type 1-Wire
Accuracy ±0.5°C
Mounting Type Through Hole
Pin Count 3
Minimum Operating Temperature -55 °C
Operating Temperature Range -55 → +125 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 5.5 V
Package Type TO-92
Length 4.95mm
Height 4.95mm
Width 3.94mm
Dimensions 4.95 x 3.94 x 4.95mm
Resolution 12 bit
Discontinued product