Schaffner Through Hole Pulse Transformer 1:1 Turns Ratio, 5mH Prim. Inductance, 1.2Ω Prim. Resistance
- RS Stock No.:
- 883-9092
- Mfr. Part No.:
- IT155
- Brand:
- Schaffner
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 883-9092
- Mfr. Part No.:
- IT155
- Brand:
- Schaffner
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Schaffner | |
| Primary Inductance | 5mH | |
| Primary DC Resistance | 1.2Ω | |
| Secondary DC Resistance | 1.2Ω | |
| Turns Ratio | 1:1 | |
| Mounting Type | Through Hole | |
| Leakage Inductance | 85µH | |
| Length | 27mm | |
| Width | 22.5mm | |
| Maximum Operating Frequency | 40 kHz, 500 (Data Transmission) kHz | |
| Maximum Temperature | +70°C | |
| Standards Met | EN 22768-m, ISO 14001, ISO 2768-m, ISO 9001, RoHS | |
| Primary Current Rating | 0.1A | |
| Primary Voltage Rating | 500V | |
| Construction | Enclosed | |
| Minimum Temperature | -25°C | |
| Termination Type | Solder Pin | |
| Select all | ||
|---|---|---|
Brand Schaffner | ||
Primary Inductance 5mH | ||
Primary DC Resistance 1.2Ω | ||
Secondary DC Resistance 1.2Ω | ||
Turns Ratio 1:1 | ||
Mounting Type Through Hole | ||
Leakage Inductance 85µH | ||
Length 27mm | ||
Width 22.5mm | ||
Maximum Operating Frequency 40 kHz, 500 (Data Transmission) kHz | ||
Maximum Temperature +70°C | ||
Standards Met EN 22768-m, ISO 14001, ISO 2768-m, ISO 9001, RoHS | ||
Primary Current Rating 0.1A | ||
Primary Voltage Rating 500V | ||
Construction Enclosed | ||
Minimum Temperature -25°C | ||
Termination Type Solder Pin | ||
- COO (Country of Origin):
- TH
Pulse transformers IT Series
Schaffner's IT pulse transformers are designed to offer you galvanic isolation for transformer coupled gate drives. The IT series provides negligible delays and the possibility of voltage scaling. They are available with single or double secondary winding for multiple gate drives. Choosing the IT product line brings you the rapid availability of a standard gate drive transformer. A wide selection on turns ratio, ignition current and voltages are designed to offer you the desired standard product.
Galvanic separation
Voltage resistance up to 8 kV
Allows high potential difference voltage scaling
Optional grounded shields
Vacuum potting
Very low partial discharge effects
PCB through hole mounting or faston types
Voltage resistance up to 8 kV
Allows high potential difference voltage scaling
Optional grounded shields
Vacuum potting
Very low partial discharge effects
PCB through hole mounting or faston types