ABB, OVR Surge Protection Device 132 V Maximum Voltage Rating 20kA Maximum Surge Current Surge Protection Device

Unavailable
RS will no longer stock this product.
RS Stock No.:
175-2607
Mfr. Part No.:
7TCA085400R0362
Brand:
ABB
Find similar products by selecting one or more attributes.
Select all

Brand

ABB

Suppressor Type

Surge Protection Device

Maximum Voltage Rating

132 V

Mounting Type

DIN Rail

Maximum Surge Current

20kA

Series

OVR

Length

106.5mm

Depth

7mm

Height

104.6mm

Dimensions

106.5 x 7 x 104.6mm

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+80°C

ABB Surge Suppressor Unit


The ABB OVR series surge suppressor unit is a protective device to ensure that electrical equipment is not damaged by a sudden voltage spike. It has an electrical rating of 132V and 20kA. It is a combined category D, C, B tested protector suitable for twisted pair signalling applications, which require either a lower in-line resistance, increased current and/or higher bandwidth. Also, suitable for DC power applications less than 0.75Amps. For use at boundaries up to LPZ 0 to protect against flashover (typically the service entrance location) through to LPZ 3 to protect sensitive electronic equipment.

Features and Benefits


• DIN rail mount
• High (750mA) maximum running current
• High bandwidth enables higher frequency (high traffic or bit rate) data communication
• Operating temperature ranges between -40°C and 80°C
• Repeated protection in lightning intense environments
• Screen terminal enables easy connection of cable screen to earth
• Strong, flame retardant, polycarbonate housing
• To protect systems against transient over voltages or surges from lightning and electrical switching events
• Ultra-slim product of 7 mm width
• Very low let-through voltage between all lines - Full mode protection

Applications


• High-speed digital communication equipment
• Process control
• Systems with long signal lines

Certifications


• IEC 61643-21
• UL-94 approved