Geckodrive Stepper Drive

  • RS Stock No. 896-8557
  • Mfr. Part No. G250 Heatsink + Screws
  • Brand Geckodrive
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

G250X - Step Motor Drive

The G250 is a high-quality step motor drive, build on a circuit board with 2x15 2.54mm header for the connection.


Stepper Motor Drive
Input frequency till 250kHz
Temperature range 0 to 70 °C
Also available is a “Screw and Heatsink Kit”, stock no. 896-8557

Available to back order for despatch 16/01/2019
Price Each
£ 5.10
(exc. VAT)
£ 6.12
(inc. VAT)
Units
Per unit
1 +
£5.10
Related Products
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadratureHost control modeIdle current reductionAnti-resonanceTorque ripple smoothingMicrostep emulation8 digital inputs4 digital outputsMay be fitted with option boards to provide an encoder feedback option (ST-ENC, ...
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protectionSynchronisation output for multi-axis systemsFull and half step drive modesTTL & CMOS compatible control interfaceOutput disable input5 & 12Vdc auxiliary outputs for external device energisationStatus LED's for condition monitoringProvision for assembling on-board oscillator with ramp, ...
Drives motors up to 85V and 6A/phaseOn board ...
Description:
Drives motors up to 85V and 6A/phaseOn board output drive current setting (2.5 to 6.0A)High efficiency chopped constant current power stage provides increased performance and reduced current consumptionSingle supply rail simplifies power supply requirementsShort-circuit and open circuit protected stage for increased reliabilitySelectable full or half step phase logicOver temperature monitor ...
The GM215 is a stepper drive with a ...
Description:
The GM215 is a stepper drive with a full motion controller. 15 operating modes include Motion Control, stand-alone control and sub-micro stepping for the smoothest possible operation of your stepper motor. Midband resonance compensationMotor smoothness, ARC Damping and VCO trim potsTerminal block 12-position 5mmFull motion controller with non-volatile memoryCapable of ...