Stieber ASNU 30 Sprag Clutch Bearing 30mm I.D., 72mm O.D., 27mm Race Width
- RS Stock No.:
- 146-5268
- Mfr. Part No.:
- ASNU 30
- Brand:
- Stieber
Image representative of range
Subtotal (1 unit)*
£285.87
(exc. VAT)
£343.04
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- Shipping from 07 January 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £285.87 |
*price indicative
- RS Stock No.:
- 146-5268
- Mfr. Part No.:
- ASNU 30
- Brand:
- Stieber
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Stieber | |
| Inside Diameter | 30mm | |
| Outside Diameter | 72mm | |
| Torque | 255Nm | |
| Race Width | 27mm | |
| Series | 63 | |
| Over-running Speed | 1400 (Inner) rpm, 2200 (Outer) rpm | |
| Keyway | Inner and Outer Race | |
| Drag Torque | 14Ncm | |
Select all | ||
|---|---|---|
Brand Stieber | ||
Inside Diameter 30mm | ||
Outside Diameter 72mm | ||
Torque 255Nm | ||
Race Width 27mm | ||
Series 63 | ||
Over-running Speed 1400 (Inner) rpm, 2200 (Outer) rpm | ||
Keyway Inner and Outer Race | ||
Drag Torque 14Ncm | ||
RoHS Status: Exempt
Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.