Aim-TTi PSA1302 Handheld Spectrum Analyser, 30 MHz → 1.8 GHz
- RS Stock No.:
- 787-7674
- Mfr. Part No.:
- PSA1302USC
- Brand:
- Aim-TTi
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£1,290.78
(exc. VAT)
£1,548.94
(inc. VAT)
- RS Stock No.:
- 787-7674
- Mfr. Part No.:
- PSA1302USC
- Brand:
- Aim-TTi
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Aim-TTi | |
| Bandwidth | 30 MHz → 1.8 GHz | |
| Number of Channels | 1 | |
| Wave Traces | Live, Reference, View | |
| Sweep Modes | Continuous, Single | |
| Setting Modes | Centre + Span, Start + Stop | |
| Maximum Frequency | 1.3GHz | |
| Minimum Frequency | 1 MHz | |
| Frequency Stability | ±10ppm | |
| Display Type | 4.3 in TFT | |
| Screen Size | 480 x 272pixel | |
| Markers | Dual, Single | |
| RF Input | SMA Connector | |
| Interface Type | USB | |
| Desktop/Handheld | Handheld | |
| Width | 49mm | |
| Model Number p | PSA1302 | |
| Maximum Operating Temperature | +40°C | |
| Battery Life | 8 h | |
| Battery Type | Lithium-ion | |
| Weight | 560g | |
| Height | 192mm | |
| Minimum Operating Temperature | +5°C | |
| Dimensions | 92 x 49 x 192mm | |
| Length | 92mm | |
Select all | ||
|---|---|---|
Brand Aim-TTi | ||
Bandwidth 30 MHz → 1.8 GHz | ||
Number of Channels 1 | ||
Wave Traces Live, Reference, View | ||
Sweep Modes Continuous, Single | ||
Setting Modes Centre + Span, Start + Stop | ||
Maximum Frequency 1.3GHz | ||
Minimum Frequency 1 MHz | ||
Frequency Stability ±10ppm | ||
Display Type 4.3 in TFT | ||
Screen Size 480 x 272pixel | ||
Markers Dual, Single | ||
RF Input SMA Connector | ||
Interface Type USB | ||
Desktop/Handheld Handheld | ||
Width 49mm | ||
Model Number p PSA1302 | ||
Maximum Operating Temperature +40°C | ||
Battery Life 8 h | ||
Battery Type Lithium-ion | ||
Weight 560g | ||
Height 192mm | ||
Minimum Operating Temperature +5°C | ||
Dimensions 92 x 49 x 192mm | ||
Length 92mm | ||
RoHS Status: Exempt
- COO (Country of Origin):
- GB
Aim-TTi PSA1302USC & PSA2702USC Spectrum Analyzers
Aim-TTi PSA Series II RF spectrum analyzers are big on performance but small on size and cost - lightweight, truly handheld instruments which incorporate extensive feature sets. Version PSA1302USC of standard product PSA1302 and version PSA2702USC of standard product PSA2702 are extended variants which include the firmware upgrade U01, the travel case, telescopic antenna and car charger. The firmware upgrade is pre-installed and all of the accessories, including the antenna and car charger, are supplied inside the fitted case.
The PSA Series II operates from a Li-ion rechargeable battery which can provide more than 8 hours of continuous operation (for continuous bench top operation it can be powered from its AC adaptor, which also recharges batteries in less than 3 hours). The instruments can be used vertically, horizontally or - by using the tilt stand - at an angle. The tilt stand can be unclipped from the back of the instrument and attached at the front to protect the screen during transport or act as a sun shield when viewing conditions are difficult. Robust rubberised buffers top and bottom of the instrument also facilitate use in the field. Applications include: traditional RF field measurements; EMC evaluations; product development and servicing; RFID measurements; frequency domain evaluation.
The PSA Series II operates from a Li-ion rechargeable battery which can provide more than 8 hours of continuous operation (for continuous bench top operation it can be powered from its AC adaptor, which also recharges batteries in less than 3 hours). The instruments can be used vertically, horizontally or - by using the tilt stand - at an angle. The tilt stand can be unclipped from the back of the instrument and attached at the front to protect the screen during transport or act as a sun shield when viewing conditions are difficult. Robust rubberised buffers top and bottom of the instrument also facilitate use in the field. Applications include: traditional RF field measurements; EMC evaluations; product development and servicing; RFID measurements; frequency domain evaluation.
1MHz to 1300MHz or 2700MHz frequency range (depending on choice of model)
Resolution bandwidths of 1MHz, 280kHz or 15kHz
-96dBm typical noise floor at -20dBm reference level
Measurement in dBm or dBμV, mV or μW
Zero span mode with AM and FM audio demodulation
Trace modes of normal, peak hold and trace average
Live, View and Reference traces in contrasting colours
Twin markers with readout of absolute and difference values
Smart marker movement with selectable peak tracking
Frequency presets and independent state storage
Auto-find automatically sets sweep parameters for the highest signal found
Unlimited storage for waveforms, set-ups and screens
User-assignable file names, file stamping from real-time clock
USB interfaces for Flash drives and PC connection
Comprehensive status and context-sensitive help screens
More than 8 hours continuous operation from a charge
Smaller and lighter (0.56kg) than other spectrum analyzers
Resolution bandwidths of 1MHz, 280kHz or 15kHz
-96dBm typical noise floor at -20dBm reference level
Measurement in dBm or dBμV, mV or μW
Zero span mode with AM and FM audio demodulation
Trace modes of normal, peak hold and trace average
Live, View and Reference traces in contrasting colours
Twin markers with readout of absolute and difference values
Smart marker movement with selectable peak tracking
Frequency presets and independent state storage
Auto-find automatically sets sweep parameters for the highest signal found
Unlimited storage for waveforms, set-ups and screens
User-assignable file names, file stamping from real-time clock
USB interfaces for Flash drives and PC connection
Comprehensive status and context-sensitive help screens
More than 8 hours continuous operation from a charge
Smaller and lighter (0.56kg) than other spectrum analyzers
Supplied with
Universal voltage mains adaptor/charger, USB connection lead, spare stylus, BNC converter for trigger input, multi-language Short Guide, full users' manual (English only), support CD containing PDF versions of manuals and support software, Firmware Upgrade PSA-U01 (installed), telescopic antenna WB-ANT, vehicle charger PSA-VC and travel case PSA2-SC.