EMERSON – ASCO Solenoid Valve SCE210B155.230/50, 2 port(s) , NC, 230 V ac, 1-1/4in

View all Solenoid Valves

Subtotal (1 unit)*

£457.46

(exc. VAT)

£548.95

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 4 unit(s) ready to ship from another location
  • Plus 999,999,995 unit(s) shipping from 30 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +£457.46

*price indicative

RS Stock No.:
306-1711
Mfr. Part No.:
SCE210B155.230/50
Brand:
EMERSON ? ASCO
Find similar products by selecting one or more attributes.
Select all

Brand

EMERSON ? ASCO

Supply Voltage

230 V ac

Number of Ports

2

Connection Size

1-1/4in

Connection

1-1/4 in G Female

Operation

Pilot

Default Valve Position

NC

Suitable Applications

Inert Gas, Liquid

Type

2/2

Orifice Diameter

28mm

Body Material

Brass

Series

210

Maximum Working Pressure

9 bar

Operating Temperature Range

-20 → +75 °C

Minimum Operating Temperature

-20°C

Thread Standard or Connection Type

G

Maximum Operating Temperature

+75°C

Connection Gender

Female

Flow Factor Kv

12.8m³/h

RoHS Status: Exempt

238 series 2//2 solenoid valves with power-assisted control.


Power-assisted control 2/2 NC and NO solenoid valves with floating diaphragm.
No minimum control pressure.
238 series solenoid valves designed to eliminate water hammer when water is turned off.
Brass body.
Pluggable PG 11P connection.


Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.