RS PRO Analogue Output, Isolating Signal Converter

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

24Vdc Trip Amplifiers, Signal Isolator/Converters

Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation

Input and output stages powered from separate secondaries of the supply transformer to provide 3-port isolation
Dual supply voltage operation
LED indication of "power on"

Specifications
Attribute Value
Input Range -250 → +250 V dc, 0 → 20 mA
Output Range 0 → 10 mA, 0 → 10 V dc
Supply Voltage 10 → 30 V dc
Mounting Type DIN Rail
Minimum Operating Temperature 0°C
Maximum Operating Temperature +50°C
Termination Screw
Operating Temperature Range 0 → +50 °C
14 In stock - FREE next working day delivery available
Price Each
£ 180.37
(exc. VAT)
£ 216.44
(inc. VAT)
Units
Per unit
1 +
£180.37
Related Products
Non-isolated High efficiency synchronous buck topology Low noise ...
Description:
Non-isolated High efficiency synchronous buck topology Low noise fixed frequency operation Wide input voltage range Up to 20A output current Adjustable output voltage via external resistors Start up into pre-biased output No minimum load required Remote differential output voltage sense Power good signal Input enable Input under-voltage lockout, over-current and ...
The MYMGK***06 series are miniature Mono Block type ...
Description:
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (Po L) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input ...
The RPM-1.0 series is a 1A non-isolated switching ...
Description:
The RPM-1.0 series is a 1A non-isolated switching regulator power module with a full set of features including adjustable output, sequencing, soft-start control, on/off control and power good signals. The ultra-compact module has a profile of only 3.75mm, but with an efficiency of up to 99%, the device can operate ...
The RPM-6.0 series is a 6A non-isolated switching ...
Description:
The RPM-6.0 series is a 6A non-isolated switching regulator power module with a full set of features including adjustable output, sequencing, soft-start control, on/off control and power good signals. The ultra-compact module has a profile of only 3.75mm, but with an efficiency of up to 99%, the device can operate ...