Siemens 3RS70, Voltage Output, Signal Conditioner

  • RS Stock No. 134-8034
  • Mfr. Part No. 3RS7002-2AE00
  • Brand Siemens
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

SIRIUS 3RS70 Signal Converter

Siemens Sirius 3RS70 signal converters perform the coupling function for analogue signals on both the input side and the output side. They are indispensable when processing analogue values with electronic controls. Under harsh industrial conditions in particular, it is often necessary to transmit analogue signals over long distances. Electrical separation is then needed as a result of the different power supplies. The resistance of the wiring causes potential differences and losses which must be prevented.

Electromagnetic disturbance and overvoltage’s can affect the signals on the input side in particular or even destroy the analogue modules. All terminals of the 3RS70 signal converters are safe up to a voltage of 30 V dc and protected against switching poles. Short circuit protection is an especially important function for the outputs.

Thanks to galvanic separation, the signal converters prevent mutual interference between the analogue channels. Thanks to the narrow and compact design, they take up little space on the mounting rail, particularly in flat control boxes and control cabinets with small gaps between tiers.

The high-quality, modern design in titanium grey contributes to the integrated appearance matching all other Siemens devices in the control cabinet. Active and passive single-range, multi-range and universal converters are available with various supply voltages and connection types for various analogue standard signals and other common sensor signals.

Features and Benefits

  • Narrow width

  • Easy to set universal converters

  • Converters with frequency output

  • All ranges are fully calibrated

  • Integrated manual/automatic switch with a setpoint generator

  • Outputs are short circuit proof

  • Up to 30 V - protected against damage caused by wiring errors

Specifications
Attribute Value
Input Range 0 → 20 mA
Output Range 0 → 10 V
Supply Voltage 24 V ac/dc
Mounting Type Snap On
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Operating Temperature Range -25 → +60 °C
Number of Channels 1
Termination Spring-Loaded
Standards Met DIN EN 61346-2, DIN EN 81346-2, IEC 60068-2-27, IEC 60068-2-6, IEC 60664, IEC 60947-1, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC61000-4-5
Series 3RS70
Available to back order for despatch 13/11/2020, delivery within 2 working days
Price Each
£ 131.13
(exc. VAT)
£ 157.36
(inc. VAT)
Units
Per unit
1 +
£131.13
Not available for guaranteed pre 9am/10am delivery
Related Products
The MTLx581 takes a low-level dc signal from ...
Description:
The MTLx581 takes a low-level dc signal from a voltage source in a hazardous area, isolates it, and passes it to a receiving instrument located in the safe area. The module is intended for use with thermocouples utilising external cold-junction compensation. A switch enables or disables the safety drive in ...
The MTL MTL5000 series signal conditioner, swith/proximity output ...
Description:
The MTL MTL5000 series signal conditioner, swith/proximity output detector interface. It enables two safe-area loads to be controlled, through relays, by a proximity detector or switch located in a hazardous area. When selected, open or short circuit conditions in the field wiring are detected by the line fault detect (LFD) ...
Millenium 2 Plus has been designed to automate ...
Description:
Millenium 2 Plus has been designed to automate building and smaller machine applications. Many pre-programmed standard functions are available for counting, timing, comparison, multiplexing, time based programming, etc.,Non-expandable, expandable, and application specific starter kits are also available. All contain a Millenium II Plus unit, programming software on CD ROM, and ...
GEN1600T/Signal Conditioner for RTD, Thermocouple and Potentiometer sensors. ...
Description:
GEN1600T/Signal Conditioner for RTD, Thermocouple and Potentiometer sensors. Other sensor characteristics can be downloaded into the product for your special needs from USB Speed-Link 3.4.1.0 http://www.status.co.uk/software.html Output stage offers voltage, bipolar voltage or current re-transmission signals High-efficiency switch mode power supply is fitted as standard for ease of use None ...