MINI MCR series limit value switches, with adjustable hysteresis and delay time and spring-cage connection.

Power supply possible via the foot element (T-connector)
Status and error indication via two diagnostic LEDs
PDT relay at output
3-way isolation
Limit value can be freely adjusted via potentioemeter on the front
Highly-compact threshold value switch for switching analog limit values

This voltage monitoring relay from Phoenix Contact is a remote switching device for opening and closing a circuit. As a limit value switch, it's used to turn moving components on an electrical device on and off.
The relay has three-way isolation, so you can control output signals at two separate points and keep them from interfering with the signal reading for enhanced reliability. The LED (light-emitting diode) lights on the module display its status and indicate errors, so you can quickly react to a fault. You can manually adjust the potentiometer on the front of the relay to change the limit value, making it a versatile choice. Use this relay for automated switching to protect you from electrical currents and switch multiple components at once.

• Compact dimensions of 120.5 (length) x 6.2 (width) x 110.5 (height) mean it fits into control systems where space is limited
• DIN rail mounting means it's easy to install
• Wide operating temperature range of -40°C to +70°C for use in harsh conditions
• Screw terminal type for ease of installation without the need for special tools