ZF Angular Position Sensor Magnet, 57.33 x 48.3 x 17.7 mm

  • RS Stock No. 765-9362
  • Mfr. Part No. CU103601
  • Brand ZF
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

AN8 Series Angular Position Sensors

The AN8 series of angular position sensors from Cherry are operated by a magnetic actuator near to the face of the sensor. These programmable magnetic position sensors are suitable for various applications including the replacement for smart bearings, pedal position sensors and throttle position sensors.

High tolerance for misalignment
Sensing up to 360 °
5 Vdc ratiometric device
No mechanical interface so no parts to wear out
Operating temperature range -40 → +125 °C

Specifications
Attribute Value
Application Angular Position Sensor
Length 57.33mm
Width 48.3mm
Height 17.7mm
Dimensions 57.33 x 48.3 x 17.7 mm
Available to back order for despatch 26/02/2020
Price Each
£ 32.40
(exc. VAT)
£ 38.88
(inc. VAT)
Units
Per unit
1 - 4
£32.40
5 - 9
£31.42
10 +
£29.73
Related Products
The Honeywell HRS100 series of Hall Effect Sensors ...
Description:
The Honeywell HRS100 series of Hall Effect Sensors provides angular position information for a variety of sensing and control applications in the automotive, marine, truck, off-road, industrial implementation, aerospace and rail industries. The use of magnetically coupled information in place of a mechanical wiper assembly provides a long life, cost-effective ...
The magnetic encoder IC range from Avago Technologies ...
Description:
The magnetic encoder IC range from Avago Technologies consists of contactless 10-bit to 16-bit programmable magnetic rotary encoders. They offer an internal voltage regulator and precise angular measurements throughout a full turn of 360°. A simple two-pole magnet is able to measure the angle by rotating it over the centre ...
The AEAT-601B is a low-cost rotary quadrature encoder ...
Description:
The AEAT-601B is a low-cost rotary quadrature encoder that converts the rotation of a shaft to a series of pulses on 3 digital output channels. A suitable microcontroller can calculate angular position, speed and rotational direction from the two signals in phase quadrature and one-pulse per revolution index channel. The ...
GXM1W.A20W0BBB is a combination of two Baumer products: ...
Description:
GXM1W.A20W0BBB is a combination of two Baumer products: 1. GXP1W.A2041C1 - Parallel absolute encoder 2. Z 140.001 - Female 37-pin D-SUB connector. + A unique signal for each angular positionNo need for initialisation (zero reference) Immediately after power up or after an interruption of power the position is maintainedNo need ...