Telemecanique Sensors XY2CE Safety Interlock Switch, 1NC/1NO, Zinc Alloy

View all Safety Interlock Switches

Subtotal (1 unit)*

£260.08

(exc. VAT)

£312.10

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 10 unit(s) ready to ship
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +£260.08

*price indicative

RS Stock No.:
130-0881
Mfr. Part No.:
XY2CE4A010
Brand:
Telemecanique Sensors
Find similar products by selecting one or more attributes.
Select all

Brand

Telemecanique Sensors

Normal State Configuration

1NC/1NO

Maximum AC Voltage

240V

Maximum DC Voltage

250V

Housing Material

Zinc Alloy

Range

Preventa XY2

IP Rating

IP66

Series

XY2CE

Maximum Current

(ac) 3 A, (dc) 270mA

Standards Met

CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508

Depth

142mm

Maximum Operating Temperature

+70°C

Minimum Operating Temperature

-25°C

Length

229mm

Width

105mm

RoHS Status: Exempt

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches


These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)

Note

The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.

Standards

EN/ISO 13850:2006

Related links