Use this rotary handle from ABB to get a grip on your switch disconnector. Once attached to an isolator, it allows you to de-energise your process with a simple flip to the off position. This makes it safe for workers to carry out routine maintenance by limiting exposure to hazardous machine parts. A red ridged thumb hold against a black background makes this handle easy to use and quick to spot in a busy setup.

• IP65-rated, which shows you that it's dustproof and protected against low-pressure water jets from any direction
• Light net weight of 135g so as not to put a strain on your system
• Width of 98mm provides plenty of handle leverage for gripping
• On, Off and Test labels clearly marked for ease of use
• Depth of just 66mm for space-saving installation

• Power distribution systems
• Switchboards
• Photovoltaic installations
• Industrial machinery
• Motor control centres

Yes, you can lock this rotary switch in the off position using up to three padlocks. As a result, only authorised staff can start up the connected machinery.

ABB OS Range

A fused switch disconnector provides a cost effective means of short circuit protection, together with circuit isolation. The choice of fuse rating determines the level of protection, the maximum value is determined by the fused switch disconnector. These items have been tested in accordance with EN 60947-3.