SKF 31309 J2/QCL7CDF 44mm I.D Taper Roller Bearing, 100mm O.D
- RS Stock No.:
- 233-7094
- Mfr. Part No.:
- 31309 J2/QCL7CDF
- Brand:
- SKF
Image representative of range
Subtotal (1 unit)*
£443.56
(exc. VAT)
£532.27
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- 999,999,999 unit(s) shipping from 17 November 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £443.56 |
*price indicative
- RS Stock No.:
- 233-7094
- Mfr. Part No.:
- 31309 J2/QCL7CDF
- Brand:
- SKF
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | SKF | |
| Inside Diameter | 44mm | |
| Outside Diameter | 100mm | |
| Roller Bearing Type | Taper | |
| Race Width | 27.25mm | |
| Bore Type | Tapered | |
Select all | ||
|---|---|---|
Brand SKF | ||
Inside Diameter 44mm | ||
Outside Diameter 100mm | ||
Roller Bearing Type Taper | ||
Race Width 27.25mm | ||
Bore Type Tapered | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in perio
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in perio