INA GS81111 57mm I.D Roller Bearing Housing Locating Washer, 78mm O.D
- RS Stock No.:
- 194-6898
- Mfr. Part No.:
- GS81111
- Brand:
- INA
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 194-6898
- Mfr. Part No.:
- GS81111
- Brand:
- INA
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | INA | |
| Inside Diameter | 57mm | |
| Outside Diameter | 78mm | |
| Race Width | 5mm | |
| Select all | ||
|---|---|---|
Brand INA | ||
Inside Diameter 57mm | ||
Outside Diameter 78mm | ||
Race Width 5mm | ||
High axial and shock loads occur in one direction but no radial loads are present
The load carrying capacity of the corresponding axial deep groove ball bearings is no longer adequate (in this case, bearings of series 811 and 812 are especially suitable)
The bearing arrangement must have very high axial rigidity
The axial space available is very small
The bearing arrangement can be configured, where the axial space is very small, as a direct bearing arrangement
The bearing parts can or must be mounted separately
The bearing arrangement is not configured in itself but, for cost reasons, ready-to-fit standard bearings are to be used
The load carrying capacity of the corresponding axial deep groove ball bearings is no longer adequate (in this case, bearings of series 811 and 812 are especially suitable)
The bearing arrangement must have very high axial rigidity
The axial space available is very small
The bearing arrangement can be configured, where the axial space is very small, as a direct bearing arrangement
The bearing parts can or must be mounted separately
The bearing arrangement is not configured in itself but, for cost reasons, ready-to-fit standard bearings are to be used