INA HK5025 50mm I.D Drawn Cup Needle Roller Bearing, 58mm O.D
- RS Stock No.:
- 191-3821
- Mfr. Part No.:
- HK5025
- Brand:
- INA
Bulk discount available
Subtotal (1 unit)*
£16.29
(exc. VAT)
£19.55
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- Plus 2 unit(s) shipping from 20 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 - 4 | £16.29 |
| 5 - 9 | £15.64 |
| 10 - 24 | £15.34 |
| 25 + | £15.00 |
*price indicative
- RS Stock No.:
- 191-3821
- Mfr. Part No.:
- HK5025
- Brand:
- INA
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | INA | |
| Inside Diameter | 50mm | |
| Outside Diameter | 58mm | |
| Roller Bearing Type | Drawn Cup Needle | |
| Race Width | 25mm | |
| Bore Type | Parallel | |
| Static Load Rating | 84000N | |
| Cage Material | Sheet Steel | |
| Number of Rows | 1 | |
| Dynamic Load Rating | 38500N | |
| End Type | Sealed | |
| Fatigue Limit Load | 11900N | |
Select all | ||
|---|---|---|
Brand INA | ||
Inside Diameter 50mm | ||
Outside Diameter 58mm | ||
Roller Bearing Type Drawn Cup Needle | ||
Race Width 25mm | ||
Bore Type Parallel | ||
Static Load Rating 84000N | ||
Cage Material Sheet Steel | ||
Number of Rows 1 | ||
Dynamic Load Rating 38500N | ||
End Type Sealed | ||
Fatigue Limit Load 11900N | ||
Are particularly suitable for applications with a very small radial section height on account of their very low cross-sectional height
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements