Filter 3M Dust for use with 3M 6000 Series Respirator 6096

The 3M™ 6096 is a filter pack, which is designed for use with the 6000, 7000 and 7500 series half face and full face masks. They provide the user with a high protection from contaminated environments in a wide range of industrial contaminants. With a filter type of A1, it can protect you against organic gases and vapours mercury vapours and mercury. The bayonet fitting types allows each filter to be clicked in place for ease.

• Gas, Vapour and Particulate Filter 6096 protects against gases, vapours and particulates

Applications

Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as;

• A- Organic vapours with a boiling point more than 65°C
• B- Inorganic vapours
• E- Acid gases
• K- Ammonia and ammonia derivatives
• AX- Organic vapours with a boiling point less than 65°C

Half-mask or full-mask respirators?

Depending on the health and safety requirements of your workplace or the demands of your application, you may need to choose between a half mask or full mask respiratory. Half mask respirators cover only the nose and mouth, while full masks cover the entire face. While both masks may have the same grade of filter, a full face mask has the benefit of sealing around the whole face, creating a more secure seal. Full face masks also have the advantage of protecting the eyes from vapours or splashing. As such, the full face mask option is often a better choice for potentially more hazardous conditions.

However, a half-mask might be a more cost-effective option if extra protection isn't needed, or might be more suitable for use in combination with specialized headgear.

Correct use of respirators

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.

Need a half-mask filtration solution to protect you from common industrial contaminants? Choose this versatile filter from 3M. It protects against gases, vapours and particulates, so is effective in environments where harmful substances such as mercury, ammonia and formaldehyde are present. Its light weight and low breathing resistance mean it balances protection with comfort. As the filter meets EN14387, you can be assured it exceeds the minimum European safety requirements for protective respiratory devices.

• Half-mask style keeps your field of vision clear
• Fits virtually any reusable 3M mask for broad compatibility

• Cleanrooms
• Laboratories
• Fume cupboards

This filter uses 3M's practical bayonet-style connection, so it simply twists and clicks into place for quick and easy installation.