Huco Reducing Bush 253.14, 3mm Shaft Diameter, 6.35mm Outside Diameter
- RS Stock No.:
- 689-108
- Mfr. Part No.:
- 253.14
- Brand:
- Huco
Image representative of range
Bulk discount available
Subtotal (1 pack of 2 units)*
£8.33
(exc. VAT)
£9.996
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- Shipping from 04 December 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit | Per Pack* |
|---|---|---|
| 2 - 8 | £4.165 | £8.33 |
| 10 - 18 | £3.995 | £7.99 |
| 20 - 48 | £3.935 | £7.87 |
| 50 + | £3.825 | £7.65 |
*price indicative
- RS Stock No.:
- 689-108
- Mfr. Part No.:
- 253.14
- Brand:
- Huco
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Huco | |
| Shaft Diameter | 3mm | |
| Outside Diameter | 6.35mm | |
| Length | 6.6mm | |
| Material | Brass | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | +60°C | |
Select all | ||
|---|---|---|
Brand Huco | ||
Shaft Diameter 3mm | ||
Outside Diameter 6.35mm | ||
Length 6.6mm | ||
Material Brass | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature +60°C | ||
- COO (Country of Origin):
- GB
Bore Reducing Bushes
Metallic bore reducers for use with acetal fork type universal joints, adjustable friction clutches, nickel bellows couplers and Uni-lat zero backlash shaft couplers
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C
Designed to adapt the bore size, thereby increasing the offering of diameters available. When fitted into hubs with set screws, these reducers function as ring clamps leaving the shafts unmarked
Shafts can be removed or re-positioned repeatedly without disturbing the reducers, which remain in the hubs
Close tolerance shafts are recommended as grip relies on adequate contact area between shaft and reducer
Operating temperature range: -40°C to +85°C
