Seeed Studio 102010129, Development Board Development Board for Grove Sensors 915MHz

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

LoRaWAN Class A/C
Ultra long range of communication
GPS communication
Ultra low power consumption
Minimum current (3.7V lipo battery) - 2mA
Minimum current (3.7V lipo battery & remove PWR LED) - 80 uA
ATSAMD21G18 @ 48MHz with 3.3V logic/power
Arduino compatible (based on Arduino Zero bootloader)
Embedded with lithium battery management chip and status indicator led
20 GPIOs
4 on-board Grove connectors
18 x PWM pins
6 x analogue inputs
1 x analogue output (A0)
3.3V regulator with 200mA output
Reset button
1.45uA sleep current in WOR mode (Spec of the modules, not the board)
High link budget of 160dB. -140dBm sensitivity and 19dBm Output power.
Dual band, 434/470MHz and 868/915MHz
Support LoRaWAN protocol, Class A/C
Ultra long range communication
Ultra low power consumption
Firmware upgrade
Small size: 23mm X 28mm with 33 pin SMT package

Attribute Value
Kit Classification Development Board
For Use With Grove Sensors
Kit Name Development Board
Frequency 915MHz
16 In stock - FREE next working day delivery available
Price Each
£ 39.33
(exc. VAT)
£ 47.20
(inc. VAT)
Per unit
1 - 9
10 - 24
25 +
Related Products
The Zig Bee open standard mesh networking is ...
The Zig Bee open standard mesh networking is a powerful way to route wireless data. The Zig Bee Mesh Kit uses XBee RF modules for low-data rate and low-power applications. RF data is transferred from node to node, where XBee modules control can extend the range. Information is able to ...
The Pycom Wi-Fi Development Board is a compact ...
The Pycom Wi-Fi Development Board is a compact quadruple network Micro Python enabled kit. It is the perfect enterprise-grade IoT platform for your connected things. It can act as a Lo Ra nano gateway and a multi-bearer (Lo Ra, Sigfox, Wi-Fi and BLE) development platform suitable for all Lo Ra ...
Seeed’s LTE CAT.1 Pi HAT is an open ...
Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series. It compatible with Raspberry Pi 1 Model B+ and later versions.LTE CAT.1 Pi HAT is designed for LTE Category 1 networks and with 2G fallback(EU version only). Embedding common protocols, ...
The Wio LTE Cat M1 / NB1 is an exciting IoT focused addition to our Wio cellular series which will provide you a more convenient IoT design and prototyping experience. The board features a M4 processor, a ublox modem with the new LTE Cat M1 and NB1, GNSS, and more.LTE ...