Cypress Semiconductor - CYW943907AEVAL1FCYW43907 WiFi Development Kit

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CYW43907 2.4/5GHz WiFi Evaluation Kit

The CYW943907AEVAL1F evaluation kit enables customers to evaluate and develop single-chip WiFi applications based upon Cypress CYW43907 devices. The kit makes use of the WICED Studio 5.0 IDE. It has an embedded TCP/IP network stack, security supplicant and other network application features.

• Murata CYW43907-1GC Cortex-R4 SoC WiFi/Ethernet SIP Module • Wireless Protocol: IEEE 802.11a/b/g/n
• RF Frequency Ranges: 2.4GHz and 5.8GHz
• RF Output Power: +12dBm @ 65Mbps, +17dBm @ 11Mbps
• Receiver Sensitivity: -75dBm @ 65Mbps (2.4GHz), -73dBm @ 65Mbps (5.8GHz)
• On-board programmer/debugger using USB interface and USB-UART bridge
• On-board MAX11615 6-channel 12-bit ADC on I²C bus
• On-board BCM5241 Ethernet PHY chip
• Host communication: Ethernet, SPI, I²C, UART
• 6 x PWM outputs
• Reset pushbutton
• 2 x User pushbuttons
• 2 x User LEDs
• RJ45 socket for Ethernet connection
• MicroSD card slot
• 2 x PCB antennas for antenna diversity
• 2 x External antenna sockets
• 10-pin JTAG connector for CYW43907 programming/debug
• 44-pin WICED GPIO header
• Arduino r3 compatible Shield headers
• Power supply: +5Vdc from USB micro-B socket or +5 to +12Vdc via barrel jack socket

Supplied with

Quick Start Guide, USB-A to Micro-B cable

Specifications
Attribute Value
RF Technology WiFi
Kit Classification Development Kit
Featured Device CYW43907
Frequency 2.4 GHz, 5 GHz
20 In stock for FREE next working day delivery
Price Each
£ 65.74
(exc. VAT)
£ 78.89
(inc. VAT)
Units
Per unit
1 +
£65.74
Related Products
Compact solution for condition monitoring and predictive maintenance ...
Description:
Compact solution for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors Main supply voltage: 18 V - 32 VMain components:32-bit ARM® Cortex®-M4 core for signal processing and analysisi NEMO 6Do FAbsolute digital pressure sensor Relative humidity and temperature sensors Digital microphone sensors IO-Link ...
The STEVAL-FKI915V1 evaluation board is based on the ...
Description:
The STEVAL-FKI915V1 evaluation board is based on the S2-LP sub-1GHz ultra-low power low data-rate transceiver suitable for ISM bands and Wireless M-Bus.The NUCLEO-L152RE main board with an STM32L low power MCU controls the S2-LP and integrates the ST-LINK/V2-1 debugger and programmer for firmware updating.The STEVAL-FKI915V1 includes an external power amplifier ...
The PAN1761 is a short-range BLE and NFC ...
Description:
The PAN1761 is a short-range BLE and NFC single mode module used for the implementation of Bluetooth functionality into various electronic devices. Small 15.6 mm x 8.7 mm x 1.9 mm SMD module Same form factor and pin out as PAN1026, PAN1760, and PAN1760A 512 kbit EEPROM memory Host mode. ...
Compact shielded Surface-Mounted Device (SMD) module Very low ...
Description:
Compact shielded Surface-Mounted Device (SMD) module Very low sleep current consumption Embedded RC232™ protocol with Addressing and Error check128 byte data buffer Two-wire UART interface for easy RS-232/422/485 serial communication No external components Easy to use data interface, and no configuration required for single-channel use.