WEPTECH 6LoWPAN Evaluation Kit for 6LoWPAN COUA Module - A001-0057

  • RS Stock No. 144-2597
  • Mfr. Part No. A001-0057
  • Brand WEPTECH
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks) refers to a communication protocol for transmission of IPv6 packets over energy-saving wireless networks. As a basis for radio communication here thestandard IEEE 802.15.4 (PHY and MAC) is served like it is also used at ZigBee and WirelessHART. Radio links can be realized in the frequency bands 868 and 915 MHz as well as 2.4 GHz. 6LoWPAN is specified by a working group of the IETF. There appropriate proposals have been created, for example, for the compression of IPv6 header (RFC6282). Together with appropriate routing procedures - which are also specified in the IETF - this technology permits the construction of meshed networks consisting of small, wirelessly communicating, low-power devices.Using appropriate gateways they can be integrated into the global IP network - a big step towards the "Internet of Things".

The COUA module is a single embedded and cost-effective Sub-1-GHz radio module. With 5,5 mA, the module stands out due to a very low RX current consumption and an even lower sleep current. The radio module is supported by the open source operating system Contiki, which allows for rapid product development on the basis of the wide range of protocols and applications that Contiki offers. All available IOs are routed to the outside, so that various sensor and actuator applications can easily be realized.

Small size (15 mm x 15 mm) for SMD mounting
1.8 – 3.8 V supply voltage
Ultra low power modes RX 5.5mA, Sleep Mode 185nA
Output power:+14dBm
Powerful ARM Cortex-M3
128kB Flash/ 20KB SRAM
All digital peripheral pins can be routed to any GPIO
Supported by the open source platform Contiki/ 6LoWPAN

Attribute Value
RF Technology 6LoWPAN
Kit Classification Evaluation Kit
Featured Device 6LoWPAN COUA Module
14 In stock for FREE next working day delivery
Price Each
£ 113.20
(exc. VAT)
£ 135.84
(inc. VAT)
Per unit
1 +
Related Products
The SLWSTK6063A Wireless Starter Kit (WSTK) is an ...
The SLWSTK6063A Wireless Starter Kit (WSTK) is an excellent starting point to get familiar with the EFR32 Flex Gecko Wireless System-on-Chip (So C). The WSTK BRD4001A mainboard features an on-board J-Link debugger, an Advanced Energy Monitor (AEM) for real-time current and voltage monitoring, and a Virtual COM port interface (VCOM). ...
The Secure AVR® BLE IoT Node incorporates an ...
The Secure AVR® BLE IoT Node incorporates an ATtiny1617 microcontroller, a fully-certified RN4871 Bluetooth® 4.2 Low Energy module, an ATECC508A Crypto Authentication device and a 3-axis accelerometer with temperature sensor to demonstrate a complete solution for a typical IoT end node. The board is powered by USB or CR2032 coin ...
The PAN1740 is a short-range BLE single mode ...
The PAN1740 is a short-range BLE single mode module used for the implementation of Bluetooth functionality into various electronic devices. Pre-programmed BT/MAC address Includes 16 MHz and 32 768 k Hz crystal calibrated up to 1 ppm Single-mode Bluetooth Smart System-on-Chip Programmable ARM CORTEX M0 CPU Autonomous BTLE stand-alone operation ...
The BLE-IOT-GEVB evaluation board adds Bluetooth 5 and ...
The BLE-IOT-GEVB evaluation board adds Bluetooth 5 and BLE functionality to the IoT Development Kit (IDK). Ultra-low power, Bluetooth 5 certified SoC – RSL10 (Cortex M3, LPDSP)Connects to IDK through Arduino style connectors Combine with sensors and actuators on the IDK to prototype complex use cases Integrated PCB antenna Antenna ...