ON Semiconductor NCP4306AADZZZADR2G, PWM Secondary Side Controller, 2 (Source) A, 7 (Sink) A, 1 MHz 8-Pin, SOIC

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

The NCP4306 is high performance driver tailored to control a synchronous rectification MOSFET in switch mode power supplies. Thanks to its high performance drivers and versatility, it can be used in various topologies such as DCM or CCM flyback, quasi resonant flyback, forward and half bridge resonant LLC.

Allows for proper timing of SR MOSFET turn on and turn off
Maximizes conduction time of the MOSFET to increase efficiency
Allows direct connection of CS input to MOSFET drain in flyback applications
Improves performance for applications working in deep CCM
Enters the IC into a low consumption standby mode
Prevents accidental MOSFET turn on or turn off due to ringing
Enhanced Operation for USB-PD Applications
Fast turn off of MOSFET for optimized conduction period
Increased stability coming in and out of Light Load
Wide output operating voltages

Specifications
Attribute Value
Number of PWM Outputs 1
PWM Controller Type Secondary Side Synchronous Rectifier
Maximum Switching Frequency 1 MHz
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Output Current 2 (Source) A, 7 (Sink) A
Output Voltage 11 V
Typical Operating Supply Voltage 35 (Maximum) V
Dimensions 5 x 4 x 1.5mm
Length 5mm
Width 4mm
Height 1.5mm
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Available to back order for despatch 23/11/2020
Price Each (On a Reel of 2500)
£ 0.227
(exc. VAT)
£ 0.272
(inc. VAT)
Units
Per unit
Per Reel*
2500 - 5000
£0.227
£567.50
7500 +
£0.216
£540.00
*price indicative
Related Products
The NIS5232 is a cost effective, resettable fuse ...
Description:
The NIS5232 is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures. It is designed to buffer the load device from excessive input voltage which can damage sensitive circuits. It also includes an Over voltage ...
The MIC5235 is a 150mA highly accurate, low ...
Description:
The MIC5235 is a 150mA highly accurate, low dropout regulator with high input voltage and ultra-low ground current. This combination of high voltage and low ground current makes the MIC5235 ideal for USB and portable electronics applications, using 1-cell, 2-cell, or 3-cell Li-Ion battery inputs.A μCap LDO design, the MIC5235 ...
Integrated Power Device Power Device Thermally Protected No ...
Description:
Integrated Power Device Power Device Thermally Protected No External Current Shunt Required9V to 18V Input Range Internal Charge PumpA Resistor sets the Current Limit levelA Capacitor programs the Slew Rate of the output at turn on (NIS5132 only).
BD2240G and BD2241G are low on-resistance N-channel MOSFET ...
Description:
BD2240G and BD2241G are low on-resistance N-channel MOSFET high-side power switches, optimized for Universal Serial Bus (USB) applications. BD2232G and BD2233G are equipped with the function of over-current detection, thermal shutdown, under-voltage lockout and soft-start. Low On-Resistance (Typ. 100mΩ) N-channel MOSFET Built-in Output Discharge Function Over-Current Detection Thermal Shutdown Open-Drain ...