SICK Inductive Threaded Barrel Proximity Sensor, M5, 1 mm Detection, PNP NO, 10 → 30 V dc

RS Stock No.:: 266-8594
Mfr. Part No.:: IMP05-01BPSVU2S
Brand:: SICK

SICK Inductive Threaded Barrel Proximity Sensor, M5, 1 mm Detection, PNP NO, 10 → 30 V dc

Subtotal (1 unit)*

£290.42

(exc. VAT)

£348.50

(inc. VAT)

FREE delivery for orders over £50.00

Temporarily out of stock

Shipping from 26 December 2025

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 +	£290.42

*price indicative

Enhance Your Sensor Setup

Proximity sensors perform best when paired with the right accessories. From mounting brackets to protective covers and connectors, our sensor accessories help you install, secure, and optimise your sensing solution. If you're browsing proximity sensors, don’t forget to explore our accessories range to complete your setup and ensure reliable, long-term performance.

Shop Now

RS Stock No.:: 266-8594
Mfr. Part No.:: IMP05-01BPSVU2S
Brand:: SICK

Specifications

Technical Reference

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SICK
	Thread Size	M5
	Sensor Technology	Inductive
	Body Style	Threaded Barrel
	Detection Range	1 mm
	Digital Switching Output Type	PNP
	Output Function	NO
	Cable Length	2m
	Connection Type	Pre-Cabled
	Supply Voltage	10 → 30 V dc
	IP Rating	IP68
	Length	27mm
	Mounting Type	Flush
	Housing Material	Phynox
	Width	5mm
	Maximum DC Voltage	30V
	Minimum Operating Temperature	-25°C
	Switching Frequency	4.8 kHz
	Standards Met	CE, EAC
	Series	IMP
	Reverse Polarity Protection	Yes
	Maximum Switching Frequency	4.8kHz
	Shielding	Shielded
	Switching Current	200 mA
	Short Circuit Overload Protection	Yes
	Maximum Operating Temperature	+70°C

	Select all
	Brand SICK
	Thread Size M5
	Sensor Technology Inductive
	Body Style Threaded Barrel
	Detection Range 1 mm
	Digital Switching Output Type PNP
	Output Function NO
	Cable Length 2m
	Connection Type Pre-Cabled
	Supply Voltage 10 → 30 V dc
	IP Rating IP68
	Length 27mm
	Mounting Type Flush
	Housing Material Phynox
	Width 5mm
	Maximum DC Voltage 30V
	Minimum Operating Temperature -25°C
	Switching Frequency 4.8 kHz
	Standards Met CE, EAC
	Series IMP
	Reverse Polarity Protection Yes
	Maximum Switching Frequency 4.8kHz
	Shielding Shielded
	Switching Current 200 mA
	Short Circuit Overload Protection Yes
	Maximum Operating Temperature +70°C

Datasheet - IMP05-01BPSVU2S

COO (Country of Origin):: LK

Overview

The inductive, high-pressure-resistant IMP sensors are perfectly suited for the query of end positions in hydraulic cylinders. The use of state-of-the-art ASIC and manufacturing technologies from SICK sets new standards in installation size, service life and load capability for the sensors. Due to the stable stainless steel housing and an active high-performance ceramic surface, they are pressure-resistant up to 500 bar.

Above-average system throughput is a matter of course for the range of models M5, M8, M12 andM14 thanks to 1 million tested pressure cycles.

At a glance

Types: M5, M8, M12 and M14
Extended sensing ranges: 1 mm to 3 mm
Electrical configuration: DC 3- and 4-wire
Enclosure rating: IP 68
Temperature range: –25 °C to +100 °C
Stainless steel housing with active surface made from stable high-performance ceramic
Pressure resistant up to 500 bar, gas-tight front
Expected service life of up to 1 million pressure cycles

Your Benefit

Reduced maintenance costs
Extremely resilient and durable
Up to 50 times longer service life compared to conventional sensors under pressure cycles
Simple compensation of cylinder tolerances
Simple integration due to small design
Controlled piston deceleration
Increased piston service life due to collision prevention at the end of the work cycle

Applications

End position detection of a piston stroke in hydraulic cylinders

Note

Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.