Reliance 7bar Temperature and Pressure Relief Valve With Male 15 mm Compression Connection
- RS Stock No.:
- 794-8439
- Mfr. Part No.:
- PTEM550759
- Brand:
- Reliance Water Controls
Image representative of range
Bulk discount available
Subtotal (1 unit)*
£101.50
(exc. VAT)
£121.80
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- 3 unit(s) ready to ship
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 - 4 | £101.50 |
| 5 - 9 | £98.46 |
| 10 + | £95.21 |
*price indicative
- RS Stock No.:
- 794-8439
- Mfr. Part No.:
- PTEM550759
- Brand:
- Reliance Water Controls
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Reliance Water Controls | |
| Connection | 15 mm Compression | |
| Maximum Set Pressure | 7bar | |
| Maximum Temperature | +95°C | |
| For Use With | Hot Water | |
| Connection Gender | Male | |
| Thread Size | 15in | |
Select all | ||
|---|---|---|
Brand Reliance Water Controls | ||
Connection 15 mm Compression | ||
Maximum Set Pressure 7bar | ||
Maximum Temperature +95°C | ||
For Use With Hot Water | ||
Connection Gender Male | ||
Thread Size 15in | ||
RoHS Status: Exempt
- COO (Country of Origin):
- US
Full Cartridge Pressure and Temperature Relief Valve
All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system.
Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.
The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used
Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.
The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used
Protect against temperature rising above 95ﾟC
Prevent over pressurisation
Twist toop cartridge design for easy servicing
Range of different pressure settings and different probe lenghts
Prevent over pressurisation
Twist toop cartridge design for easy servicing
Range of different pressure settings and different probe lenghts
Note
Approvals
WRAS
Related links
- Reliance 7bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection
- Reliance 10bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection
- Reliance 4.5bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection
- Reliance Pressure Reducing Valve, 15 mm Compression Female
- Reliance 3bar Pressure Relief Valve With Female BSP 3/4 in BSP Female Connection and a BSP 3/4 Exhaust Port
- Reliance 3bar Pressure Relief Valve With Female BSP 1/2 in BSP Female Connection and a BSP 1/2 Exhaust Port
- Reliance 16bar Anti-Vacuum Valve With Male BSP 1/2 in BSP Male Connection
- Reliance 10bar Diffential Bypass Valve With Female 22 mm Metric Connection and a 22mm Exhaust Port