Geckodrive 7 A Stepper Motor Stepper Drive, 18 → 80V dc, 2.5 x 0.83 x 2.58in

  • RS Stock No. 793-4127
  • Mfr. Part No. G201X
  • Brand Geckodrive
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

G201X - Step Motor Drive

The G201X is a stepper motor drive with an aluminium case. Drives stepper motors up to 7 Amps.

STEP and DIRECTION inputs are +3.3/5 VDC compatible
Recirculate mode during STANDBY greatly reduces motor heating while stopped
Power-on RESET
Direction is clocked in on the active step pulse edge
DIP switch settings for current and motor version
Needs heatsinking for current settings greater than 3 amps
Low motor heating while stopped
Power supply voltage between 18 and 80 VDC
Aluminium cover and plate
Connector type is Modular, 5mm pitch

Specifications
Attribute Value
For Motor Type Stepper Motor
Current Rating 7 A
Voltage Rating 80 V dc
Board Supply Voltage 18 → 80V dc
Overall Length 2.5in
Overall Width 0.83in
Overall Depth 2.58in
19 In stock for FREE next working day delivery
Price Each
£ 135.76
(exc. VAT)
£ 162.91
(inc. VAT)
Units
Per unit
1 +
£135.76
Related Products
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadrature. Analogue velocity (oscillator) mode. Host commands (SCL compatible)Si. Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature. Host control mode. Idle current reduction. Anti-resonance. Torque ripple smoothing. Microstep emulation8 digital inputs4 digital outputs. May be fitted with option boards to ...
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protection. Synchronisation output for multi-axis systems. Full and half step drive modesTTL & CMOS compatible control interface. Output disable input5 & 12Vdc auxiliary outputs for external device energisation. Status LED's for condition monitoring. Provision for ...
STR - High Performance Stepper Drive.Easy Drive Configuration, ...
Description:
STR - High Performance Stepper Drive.Easy Drive Configuration, on-board DIP switches are used to configure running current, idle current, load inertia ratio and step resolution. STR Stepper Drive. Dual H-bridge, 4 quadrant4 state PWM at 16 k. HzSwitch Selectable Parameters. Anti-Resonance. MicrosteppingMicrostep Emulation. Self Test. Simple Setup, no software required. ...