RS PRO 780 Series Flow Meter 0.25L/min to 6.5 L/min

View all Flow Sensors
Unavailable
RS will no longer stock this product.

Alternative

This product is not currently available. Here is our alternative recommendation.

presentation
RS PRO 22N-030-V Series Flow Meter
RS Stock No.
511-3909

Each

£325.19

(exc. VAT)

£390.23

(inc. VAT)

RS Stock No.:
257-149
Brand:
RS PRO
Find similar products by selecting one or more attributes.
Select all

Brand

RS PRO

Product Type

Flow Meter

Body Material

Acetal Copolymer

Maximum Operating Temperature

70°C

Series

780

Standards/Approvals

No

Wetted Materials

Acetal Copolymer

Minimum Flow Rate

0.25L/min

Maximum Flow Rate

6.5L/min

RoHS Status: Exempt

COO (Country of Origin):
GB

RS PRO Liquid Flow Sensors


RS PRO flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15 mm diameter pipe connections. These flow sensors are designed to tailor the transducer to any particular requirements and needs of the user. A variety of pipe connections, electrical terminations and flow ranges are possible giving several possible ways in which it can be arranged that should satisfy various applications.

Before installing flow sensors there are a few things to consider which are bends, valves, flow regulators, tee junctions and other fittings with cause the flow to travel faster at one side of the pipe relative to the other. This asymmetry in the flow can affect the calibration and the disturbance should be as far removed from the sensor as possible and ideally put after the flow sensor. Turbine transducers are affected by viscosity and where possible the viscosity (temperature) of the liquid should be kept fairly constant.

Sensor options include:

257-149 - Grey liquid flow sensor,0.25 to 6.5 l/min, 500Hz, 4600 pulses/litre

257-133 - Beige liquid flow sensor,1.5 to 30 l/min, 600Hz, 1200 pulses/litre

These RS PRO flow transducers have been manufactured to the highest standards and with correct installation and maintenance they will last a long time with reliable operation throughout.

Features and Benefits:


  • Provides a pulsed output proportional to flow rate

  • LED and photodetector are separated by a turbine mounted on sapphire bearings

  • The bearings are made of sapphire for long life and reliability

  • LED requires an external current limiting resistor (dependent on supply voltage)

  • Suitable for use with mains and heating system waters etc.

  • Rise/fall times 60/6ns

  • Output voltage 200mV (low); VCC (high)

  • Diode: Forward current 10mA, Power dissipation 100mW

  • Body, retaining cap and rotor material is acetal copolymer

  • Rotor housing is clear nylon

  • Stainless steel spindle - good chemical resistance

  • Nitrile rubber 'O' ring

  • Length: 89 mm

  • Height: 51 mm

  • Width: 37 mm

  • Easy to install and simple to use

  • Low pressure drop

  • Various flow rates

  • High resolution/frequency output

    • How it works

    A jet of liquid is directed at a free running turbine in a specially shaped chamber. The rate of rotation of the turbine is directly proportional to flow rate and the number of revolutions is proportional to the total amount of liquid passed. The passage of each turbine blade cuts a powerful beam of infra red light, this blocking is detected electronically.

    Typical Applications:


    Flow sensors and indicators are flow meter devices used to measure the amount of liquid, gas or vapour that passes through them and each type of flow sensor has its own specific applications and installation constraints. These flow transducers have been designed for use with mains and heating system waters. Flow sensors can be found in various applications that require control of fluids such as:

  • Washing machines

  • Showers

  • Dishwashers

  • Beverage dispensers

  • Water treatment

  • Cooling systems

    • Why RS PRO?

    RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

    Note

    Not suitable for use with strong mineral acids/solutions, strong or searching solvents.

    Related links