Microchip for PIC and dsPIC Microcontrollers PG164140

  • RS Stock No. 171-7762
  • Mfr. Part No. PG164140
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC® and dsPIC® flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE), version 4.15. The MPLAB PICkit 4 is connected to the design engineer's computer using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming™ (ICSP™). An additional micro SD card slot and the ability to be self-powered from the target means you can take your code with you and program on the go.*

PICkit 4 supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway, while being backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP. The PICkit 4 also has a unique programmer-to-go function with the addition of a micro SD card slot to hold project code and the ability to be powered by the target board.*The MPLAB PICkit 4 In-Circuit Debugger/Programmer supports many, but not all, PIC MCUs and dsPIC DSCs at this time. The firmware is continually being upgraded to add support for new devices. To request priority device support or to report issues, email: PICkit4_Update@microchip.com

Features and Benefits

Matches silicon clocking speed - Programs as fast as the device will allowTarget voltage of 1.20V to 5.5V - Wide target voltage supports a variety of devicesCan supply up to 50mA of power to the target - Can be powered from the target to program in the field*Minimal current consumption at <100μA from targetPortable USB-powered and RoHS-compliant8-pin single in-line header - Supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data GatewayBackward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSPOption to be self-powered from the target (2.7V to 5.5V)Programmer-to-Go (PTG) support

Kit Contains

MPLAB PICkit 4 In-Circuit Debugger/ProgrammerUSB to micro-B USB cableWarranty card2 MPLAB PICKit 4 stickers

Specifications
Attribute Value
Product Type Debugger, Programmer
For Use With PIC and dsPIC Microcontrollers
Kit Classification Development Kit
Kit Name MPLAB PICkit 4 In-Circuit
Available to back order for despatch 09/04/2020
Price Each
£ 38.59
(exc. VAT)
£ 46.31
(inc. VAT)
Units
Per unit
1 +
£38.59
Related Products
The CAR-06 is a programmer that supports all ...
Description:
The CAR-06 is a programmer that supports all types of PIC and ATMEL chip cards.It connects to the USB port of your PC and does not require any external power supply.Equipped with a 24-MHz RISC processor, it offers very fast single pass processing.The software provided enables automatic detection of the ...
The PIC-01 allows you to program Microchip serial ...
Description:
The PIC-01 allows you to program Microchip serial PIC microcontrollers, (PIC12Cxxx, PIC12CExxx, PIC12Fxxx, PIC16Cxxx, PIC16CExxx, PIC16Fxxx, and PIC18Fxxxx families), as well as serial EEPROMs Series, (24Cxx family).Equipped with 5 tulip sockets, supports components in DIP packages of 8, 18, 28 and 40 pins.It is equipped with a true RS-232 interface ...
The Leaper-5E is a battery or mains powered ...
Description:
The Leaper-5E is a battery or mains powered USB Handy MCS-51 Writer. Supports a wide range of Devices like Atmel, Hyundai, Intel, Issi, Philips, SST, Temic and Winbond. High performance on programming Atmel AT89S52 only 4 seconds to erase, blank check, program and verify. It connects to PC via USB ...
The Dataman 448Pro2 is a super fast PC ...
Description:
The Dataman 448Pro2 is a super fast PC based gang programmer with four independent 48-pin ZIF sockets, ISP capabilities and USB 2.0 connectivity. The 448Pro2 is built to meet the demands of super fast high volume production programming with minimal operator effort. Supporting over 116,000 (July 2019) devices with new ...