Ultimaker Nozzle Nozzle for use with Olsson Block, Ultimaker 2 0.25 mm

View all 3D Printer Parts

Subtotal (1 unit)*

£26.21

(exc. VAT)

£31.45

(inc. VAT)

Add to Basket
Select or type quantity
Last RS stock
  • Final 43 unit(s), ready to ship
Units
Per unit
1 +£26.21

*price indicative

RS Stock No.:
110-1982
Mfr. Part No.:
OBN001
Brand:
Ultimaker
Find similar products by selecting one or more attributes.
Select all

Brand

Ultimaker

Product Type

Nozzle

Sub Type

Nozzle

Nozzle Material

Brass

For Use With

Olsson Block, Ultimaker 2

Nozzle Size

0.25 mm

Standards/Approvals

No

RoHS Status: Exempt

COO (Country of Origin):
NL

Ultimaker 2 Jet Nozzles


The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.

With these special nozzles, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean them efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer.

Use the 0.25mm brass nozzle to print small detailed prints, it's an expert nozzle (RS 110-1982)

The 0.4mm (RS 110-1983) is the standard size for a lot of 3D printers

If you print in wood filaments, this brass nozzle of 0.8mm is perfect for the job (RS 110-1985)

Ultimaker Accessories


Note

This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.

Related links