300-001, Single Sided 229 x 159mm UV Exposure Unit With 2 x 8 W Tubes, 420 x 175 x 90mm
- RS Stock No.:
- 555-279
- Mfr. Part No.:
- 300-001
- Brand:
- Mega Electronics
Discontinued
- RS Stock No.:
- 555-279
- Mfr. Part No.:
- 300-001
- Brand:
- Mega Electronics
Specifications
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Mega Electronics | |
| Type | Single Sided | |
| Exposure Area | 229 x 159mm | |
| Maximum Timer Setting | 6min | |
| Timer Type | Mechanical | |
| Tube Configuration | 2 x 8 W | |
| Dimensions | 420 x 175 x 90mm | |
| Depth | 175mm | |
| Height | 90mm | |
| Width | 420mm | |
| Select all | ||
|---|---|---|
Brand Mega Electronics | ||
Type Single Sided | ||
Exposure Area 229 x 159mm | ||
Maximum Timer Setting 6min | ||
Timer Type Mechanical | ||
Tube Configuration 2 x 8 W | ||
Dimensions 420 x 175 x 90mm | ||
Depth 175mm | ||
Height 90mm | ||
Width 420mm | ||
RoHS Status: Not Applicable
UV Exposure Units
Peak output from the UV tubes occurs in the region of 350nm. An instruction leaflet is supplied (includes information for making PCBs).
UV Exposure Units for preparation of track layouts on PCBs
Foam layer in lid ensures excellent artwork to PCB contact
Small unit has mechanical 0 to 6 minute timer
Electronic timer with touch membrane control panel in larger units
UV tube ends are masked off to ensure "true and even" usable exposure area. (All UV tubes produce less UV at tube ends)
Foam layer in lid ensures excellent artwork to PCB contact
Small unit has mechanical 0 to 6 minute timer
Electronic timer with touch membrane control panel in larger units
UV tube ends are masked off to ensure "true and even" usable exposure area. (All UV tubes produce less UV at tube ends)
Note
Medium unit shown, other similar
Caution
Whilst the UV light emitted is not dangerous, some eye discomfort may be experienced if the tubes are viewed directly
PCB Development Equipment
These Processing Tanks comprise of a number of different versions to enable the following complete 7-stage production process to be undertaken:,1. Develop, 2. Wash, 3. Etch, 4. Wash, 5. Resist Strip, 6. Wash, 7. Chemical Tin.