Silicon Labs EFM8SB1 Sleepy Bee MCU Starter Kit SLSTK2010A

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

EFM8 Sleepy Bee Starter Kits

Two starter kits for evaluation of the very low-power 8-bit EFM8 Sleepy Bee microcontrollers. EFM8 Sleepy Bee microcontrollers offer very low power consumption by combining innovative low-energy techniques with short wakeup times and include up to 14 high-quality capacitive touch sense channels.

SLSTK2010A: 25MHz EFM8SB10F8G-A 8051-core microcontroller, 8KB Flash memory, 512B RAM (RS 865-2375)
SLSTK2011A: 25MHz EFM8SB20F64G-A 8051-core microcontroller, 64KB Flash memory, 4532B RAM (RS 865-2384)
Integrated debugger
Advanced Energy Monitor (AEM)
Si7021 humidity and temperature sensor on I2C bus
128 x 128 pixel memory LCD display, reflective monochrome
2 x user pushbuttons
Reset pushbutton
Thumb analogue joystick
Capacitive touch pads
Access to GPIO via breakout pads
32kHz crystal for Real Time Clock (RTC) operation
User LED (tri-colour for SLSTK2011A, single-colour for SLSTK2010A)
Powered from USB connector or CR2032 coin cell, selected by slide-switch
CR2032 coin cell holder
miniUSB power connector
20-pin Expansion header & Debug connectors

Supplied with

CR2032 battery, getting started card and USB cable.

The EFM8 8-bit microcontroller family has an unparalleled combination of features and capabilities including a high-speed pipelined 8051 core, ultra-low power, precision analogue and enhanced communication peripherals, integrated oscillators, small-footprint packages, and a crossbar architecture that enables flexible digital and analogue multiplexing to simplify PCB design and I/O signal routing. These next-generation 8-bit devices are aimed at the engineer developing products for the Internet-of-Things (IoT) which will be very small, perform complex processing and run off tiny batteries.

Specifications
Attribute Value
Classification Starter Kit
Kit Name EFM8SB1 Sleepy Bee
Technology MCU
Processor Type MCU
7 In stock for FREE next working day delivery
Price Each
£ 22.87
(exc. VAT)
£ 27.44
(inc. VAT)
Units
Per unit
1 +
£22.87
Related Products
The FM4 S6E2H-Series Starter Kit enables the design ...
Description:
The FM4 S6E2H-Series Starter Kit enables the design and debugging of the S6E2HG microcontroller. The high performance S6E2HG 32-bit microcontroller is based on an ARM Cortex-M4F processor and features various peripherals. On-board interfaces include full-speed USB host and device, and micro-SD card.The S6E2H-Series Starter Kit exposes 90+ Inputs/Outputs connections for ...
The FM4-U120-9B560 Starter Kit enables prototype development for ...
Description:
The FM4-U120-9B560 Starter Kit enables prototype development for the Cypress 160 MHz FM4 MB9B560M Motor Control ARM Cortex-M4 Microcontroller. The kit features USB device, SD card interface and access to all Inputs/Outputs.The FM4-U120-9B560 Starter Kit supports the industry standard CMSIS-DAP interface for programming and debugging of the MB9BFx6xM-Series microcontrollers.
The 200 MHz ARM Cortex-M4 FM4 S6E2C-Series Microcontroller ...
Description:
The 200 MHz ARM Cortex-M4 FM4 S6E2C-Series Microcontroller Starter Kit enables rapid development with Ethernet, USB and audio. On-board sensors include an Accelerometer and a Phototransistor. External peripherals interface to Stereo codec, SRAM memory, Serial flash and multi-colour LEDs.The FM4-176L-S6E2CC-ETH kit supports the industry standard CMSIS-DAP interface for programming and ...
The SAM4S Xplained Pro Starter Kit is designed ...
Description:
The SAM4S Xplained Pro Starter Kit is designed to evaluate the ARM SAM4SD32 microcontroller.Features & Benefits of the SAM4S Xplained Pro Starter Kit•SAM4SD32 microcontroller•Embedded debugger•Reset button•Yellow user ID•User pushbutton•USB interface•2 Gb NAND flash•32.768 k Hz crystal•12 MHz crystal•SD card socket•3 Xplained Pro extension headers•Display header•PIOD connector with all PIO signals•SPARE ...