Gauge Pressure Sensor 0-30 psi 5V SMT-4

  • RS Stock No. 169-7657
  • Mfr. Part No. 26PCDFA6G
  • Brand Honeywell
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Honeywell 24PC/26PC Series Low Pressure Sensors

These miniature Surface Mount Technology (SMT) Low Pressure Sensors are small, cost effective devices intended for use with wet/wet differential sensing. Based on the long established reliability and accuracy of the single in-line package, the SMT version’s smaller configuration reduces the footprint area on the printed circuit board thereby reducing overall PCB size and cost. The sensor is capable of being board-mounted with other common SMT devices, helping to eliminate secondary board mounting operations and improving manufacturing productivity.

The 24PC/26PC sensors feature proven sensing technology that uses a specialized piezo-resistive micro-machined sensing element to offer high performance, reliability, and accuracy. Both sensor series are unamplified but the 26PC series are temperature compensated. The sensors can be used with a wide variety of wet and dry media that are compatible with polyphthalamide (PPA) plastics and media seals and they are designed to measure pressures from ±1 to ±15 psi over an operating temperature range of -40 to 85 ºC.

• Compact SMT mounting package
• Wet/Wet capability (i.e. liquids on both ports)
• 24PC Series: Uncompensated/Unamplified
• 26PC Series: Compensated/Unamplified
• RoHS compliant
• Designed and manufactured according to ISO 9001 standards

Pressure Sensors, Honeywell

Specifications
Attribute Value
Pressure Reading Type Relative
Minimum Pressure Reading 0psi
Maximum Pressure Reading 30psi
Accuracy ±0.25 %
Output Type Unamplified
Media Measured Nitrogen Gas, Oxygen
Analogue Output 0 → 100 mV
Electrical Connection 4-Pin Connector
Response Time 1 ms
Supply Voltage 2.5 → 16 V dc
Mounting Type Through Hole
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Available to back order for despatch 30/10/2020
Price Each (In a Box of 25)
£ 26.952
(exc. VAT)
£ 32.342
(inc. VAT)
Units
Per unit
Per Box*
25 +
£26.952
£673.80
*price indicative
Related Products
Vacuum: 150mm (6in)WG to 670mbar (9.8psi)Factory preset to ...
Description:
Vacuum: 150mm (6in)WG to 670mbar (9.8psi)Factory preset to 9in WG pressure. External screw adjustment Can be used to detect pressure differentials across a bulkhead. GF Polyester housing, silicone rubber diaphragm, silver plated contacts Body thread size: 14 x 1.4mm Pin diameter 1mm, Pin centres 12.8mm.For suitable PVC tubing see 317-724. ...
These ultra-low pressure differential sensors provide an output ...
Description:
These ultra-low pressure differential sensors provide an output voltage proportional to applied pressure. They operate from a single positive supply voltage rating at 8V. Signal conditioning results in directly useable outputs and temperature compensation results, in predictable performance over the specified temperature range. The Honeywell pressure sensor is fully signal ...
Miniature, very low pressure, un-amplified differential transducer with ...
Description:
Miniature, very low pressure, un-amplified differential transducer with silicon diaphragm and ratiometric output. High sensitivity and low null shift Gauge measurements may be achieved by venting one port to atmosphere Easily interchanged Supplied with instruction leaflet Media: P1 Port Dry Gases only; P2 Port Wetted Materials, Polyester housing, Epoxy adhesive, ...
Epcos AK2 series gauge pressure transducers feature a ...
Description:
Epcos AK2 series gauge pressure transducers feature a robust stainless steel and plastic casing and piezoresistive MEMS technology. The mV output is directly proportional to applied pressure, and ratiometric to the supply voltage. Dual in-line package for PCB mounting. Epcos AK2 Series Gauge Pressure Transducers.