RS PRO ATEX, IECEx Pressure Sensor Gauge

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

RS Pro IPSS Series ATEX Pressure Transmitters

RS Pro IPSS ATEX industrial pressure transducers are suitable for use in a wide range of industrial applications. A piezoresistive ceramic sensor gives excellent media compatibility within a stainless steel housing.

An incorporated microprocessor-based amplifier, requiring no adjusting, gives stable electronics, especially industrial applications.

Piezo-resistive thick film ceramic sensor
Stainless steel body
+/- 0.25% accuracy
Microprocessor based amplifier
Pressure ranges from 1000 mbar to 100 bar

Note

Temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate.

Specifications
Attribute Value
Pressure Reading Type Gauge
Minimum Pressure Reading -1bar
Maximum Pressure Reading 5bar
Accuracy ±0.25 %
Output Type Analogue
Media Measured Grey Water, Sewage, Viscous Fluid
Process Connection BSP 3/4
Electrical Connection M12 4-pin
Analogue Output 4 → 20 mA
Maximum Current 28 mA
Supply Voltage 12 → 28 V dc
Housing Material Stainless Steel
IP Rating IP65
Minimum Operating Temperature -20°C
Hazardous Area Certification ATEX, IECEx
Mounting Type Semi-Flush
Maximum Operating Temperature +80°C
Available to back order for despatch 20/12/2019
Price Each
£ 297.25
(exc. VAT)
£ 356.70
(inc. VAT)
Units
Per unit
1 +
£297.25
Related Products
Range of pressure converters used to measure relative ...
Description:
Range of pressure converters used to measure relative and absolute pressures in liquid and gas environments.Output 4 → 20 mA.AISI 304 stainless steel housing.Part in contact with measured environment in AISI 316Ti / 316L stainless steel.2-wire output with screw terminal and cable gland.
TK Series pressure sensors specially designed for applications ...
Description:
TK Series pressure sensors specially designed for applications requiring long-distance signal (4 mA) transmission or in smart control systems. TK series transmitters are based on the extensimetric thick film measuring principleThe primary measuring element is directly deposited on the membrane using a thick film serigraphy processAll parts that are in ...
XMLP pressure transmitters rated at less than 9 ...
Description:
XMLP pressure transmitters rated at less than 9 bar or 100 psi:These transmitters integrate a ceramic pressure measuring cell. Ceramic technology has been used successfully for many years and offers a high level of sensitivity that is particularly suitable for measuring low pressures. Ceramic also provides good resistance to abrasive ...