Altecnic Pressure Reducing Valve, 3/4 in G Female

  • RS Stock No. 777-0346
  • Mfr. Part No. 533451
  • Brand Altecnic
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

Series 533 Pressure Reducing Valves

Pressure reducing valves are installed in residential water systems to reduce and stabilise inlet pressures from mains water supplies or boosted water systems, which generally are too high and variable for domestic appliances to function correctly.
The 533 series is specially designed for hot and cold services in houses or apartments to equalise the hot or cold water supplies or both and prevent excessive pressure at outlets such as taps and showers

Maximum pressure at inlet : 12 bar
Maximum working temperature : 65°C
Outlet adjustment range : 1 - 6 bar (dynamic control only)
Pressure gauge range: 0 to 10 bar
Medium: potable water
Pressure gauge connection: G1/4
Body Brass chrome plated: BS EN 12165 CW617N
Cover Nylon: PA 66GF30
Control stem DZR alloy
Seals Nitrile rubber
Strainer screen Stainless steel

Pressure Reducing Valves

Specifications
Attribute Value
Connection 3/4 in G Female
Minimum Outlet Pressure 1bar
Maximum Outlet Pressure 6bar
Body Material Brass
Connection Gender Female
Connection Size 3/4in
Thread Standard or Connection Type G
Outlet Pressure Range 1 → 6bar
46 In stock for FREE next working day delivery
Price Each
£ 53.75
(exc. VAT)
£ 64.50
(inc. VAT)
Units
Per unit
1 +
£53.75
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgings EPDM seals Creep resistant bearings Reinforced nylon handle Reduced risk of contamination by top and bottom seals Operating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 bar Polished disc.
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 bar Rising Stem Threaded bonnet Renewable disc which is suitable for steam service Bronze trim with glass filled PTFE disk BS21 Taper thread (ISO 7).
2/2- way pneumatically operated angle seat valves. Available ...
Description:
2/2- way pneumatically operated angle seat valves. Available in both NO (Normally Open) and NC (Normally Closed) configurations and with the flow direction above or below the seat For use with neutral gases, air, steam, water and oil. (also aggressive fluids with stainless steel body). Polyamide actuator casing and PTFE ...
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second Suitable for use with water or compressed air Can be installed in any position and serviced in situ Single piece acetal resin cartridge Preset pressure40°C maximum ...