Infineon 24V BATT SWITCH DEMO MOSFET Driver for AUIR3242S for Battery Switch, Construction Agricultural Vehicles (CAV),
- RS Stock No.:
- 232-6793
- Mfr. Part No.:
- 24VBATTSWITCHDEMOTOBO1
- Brand:
- Infineon
Bulk discount available
Subtotal (1 unit)*
£259.34
(exc. VAT)
£311.21
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- Shipping from 03 November 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 - 1 | £259.34 |
| 2 - 4 | £252.60 |
| 5 + | £246.37 |
*price indicative
- RS Stock No.:
- 232-6793
- Mfr. Part No.:
- 24VBATTSWITCHDEMOTOBO1
- Brand:
- Infineon
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Infineon | |
| Power Management Function | MOSFET Driver | |
| For Use With | Battery Switch, Construction Agricultural Vehicles (CAV), Power Distribution, Relays | |
| Kit Classification | Demonstration Board | |
| Featured Device | AUIR3242S | |
| Kit Name | 24V BATT SWITCH DEMO | |
Select all | ||
|---|---|---|
Brand Infineon | ||
Power Management Function MOSFET Driver | ||
For Use With Battery Switch, Construction Agricultural Vehicles (CAV), Power Distribution, Relays | ||
Kit Classification Demonstration Board | ||
Featured Device AUIR3242S | ||
Kit Name 24V BATT SWITCH DEMO | ||
24V BATT SWITCH DEMO
The 24 V ADR Switch Demonstrator shows a semiconductor based solution of a 24 V battery master switch for trucks as required by the ADR regulation (European Agreement Concerning the International Carriage of Dangerous Goods by Road).
The demonstrator consists of eight low ohmic MOSFETs connected in parallel and mounted on a structured copper IMS (insulated metal substrate) board together with a gate driver circuit to switch those MOSFETs on and off. In order to protect the MOSFETs against excessive overvoltage there are four transient voltage suppressor diodes implemented at the bottom side of the board.
The demonstrator consists of eight low ohmic MOSFETs connected in parallel and mounted on a structured copper IMS (insulated metal substrate) board together with a gate driver circuit to switch those MOSFETs on and off. In order to protect the MOSFETs against excessive overvoltage there are four transient voltage suppressor diodes implemented at the bottom side of the board.
Meeting market demands for master switches
Smaller is better here, as a small battery disconnect switch solution is easier to integrate, costs less and requires less development effort. Ideal dimensions measure just 100 mm x 50 mm. Battery switch customers also look for designs with various specifications, such as:
•Thickness: 1.3 mm
•Electrical resistance: 60 μOhm
•Thermal resistance (non-isolated version): 0.1 K/W
•Thermal resistance (isolated version): ∼ 0.2 K/W
•No. of copper-filled laser vias per MOSFET: 300
•RDS(on) from terminal to terminal: 110 μOhm
•Thickness: 1.3 mm
•Electrical resistance: 60 μOhm
•Thermal resistance (non-isolated version): 0.1 K/W
•Thermal resistance (isolated version): ∼ 0.2 K/W
•No. of copper-filled laser vias per MOSFET: 300
•RDS(on) from terminal to terminal: 110 μOhm
Potential Applications
•Unidirectional battery disconnection
•Safety applications such as EPS, engine fan, chassis control etc.
•Replacement of mechanical Relay
•High current control load
•Safety applications such as EPS, engine fan, chassis control etc.
•Replacement of mechanical Relay
•High current control load