Renesas Electronics YROTATE for RX23T for 3-Phase Permanent Magnet Motor
- RS Stock No.:
- 125-3763
- Mfr. Part No.:
- YROTATE-IT-RX23T
- Brand:
- Renesas Electronics
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 125-3763
- Mfr. Part No.:
- YROTATE-IT-RX23T
- Brand:
- Renesas Electronics
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | Renesas Electronics | |
For Use With | 3-Phase Permanent Magnet Motor | |
Kit Classification | Evaluation Kit | |
Featured Device | RX23T | |
Kit Name | YROTATE | |
Select all | ||
---|---|---|
Brand Renesas Electronics | ||
For Use With 3-Phase Permanent Magnet Motor | ||
Kit Classification Evaluation Kit | ||
Featured Device RX23T | ||
Kit Name YROTATE | ||
RX23T Motor Control Reference Design Kit
The YROTATE-IT-RX23T board with its RX23T microcontroller is capable of driving 3-phase permanent magnet AC motors up to 48Vdc with a peak current of 5A. It features an intuitive PC GUI to manage the motor speed, display the vector control parameters and provide access to an extensive list of parameters: motor intrinsic parameters and PI coefficients.
40MHz R5F523T5ADFM 32-bit MCU with 64KB Flash memory, 10KB RAM, FPU
Embedded firmware: Sensorless vector control algorithm (Field Oriented Control)
Current detection: Single or Three shunt configuration (10mΩ)
PWM Frequency: 64kHz
Control Loop Speed: 20kHz
Vector Control Loop: 40μs
Isolated USB interface
E1 program/debug connector
Powered via USB or External connector
Operating Temperature Range: -20 to +85°C
Board Dimensions: 128 x 130mm
Tools: e²studio 4.0.2.008, CS+, RXC Toolchain, CC RX version v2.03.00
Embedded firmware: Sensorless vector control algorithm (Field Oriented Control)
Current detection: Single or Three shunt configuration (10mΩ)
PWM Frequency: 64kHz
Control Loop Speed: 20kHz
Vector Control Loop: 40μs
Isolated USB interface
E1 program/debug connector
Powered via USB or External connector
Operating Temperature Range: -20 to +85°C
Board Dimensions: 128 x 130mm
Tools: e²studio 4.0.2.008, CS+, RXC Toolchain, CC RX version v2.03.00
Supplied with
Quick Start Guide, Nanotec DB24S03 BLDC motor, USB cable