STMicroelectronics X-NUCLEO-IHM06A1 Motor Driver

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

X-NUCLEO-IHM06A1 Bipolar Stepper Motor Driver Expansion Board

The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life.

• Operating voltage range: +1.8 to +10Vdc • Output current: 1.3Arms per phase
• Microstep resolution: Up to 1/256th of a step
• Current control with adjustable off-time
• Standby consumption: <80nA
• Non-dissipative over-current detection and protection
• Over-temperature protection
• 4 x Output activity LEDs
• Fault LED
• Screw terminals for motor signals and power supply
• ST morpho connector pads for host MCU board
• Arduino Uno r3 compatible Shield headers
• Compatible with STM32 Nucleo MCU boards

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Power Management Function Motor Driver
35 In stock for FREE next working day delivery
Price Each
£ 8.26
(exc. VAT)
£ 9.91
(inc. VAT)
Units
Per unit
1 +
£8.26
Related Products
Current detection resistors built inMicro stepping controller built ...
Description:
Current detection resistors built inMicro stepping controller built inEasy to design and reduce the mounting areaProtective function against over-current and over-heat built inEasy to switch between full step, half step, 1/4 step, 1/8 step and 1/16 step with prevention of jumping phaseSuperior in safety driveApplicationsComputing & PeripheralsIndustrialEnd ProductsMulti-Function PrinterDocument ScannerSecurity ...
The ON Semiconductor STK682-010GEV evaluation board features the ...
Description:
The ON Semiconductor STK682-010GEV evaluation board features the STK682-010-E (RS 801-6814) micro-stepping motor driver IC. It uses a bipolar constant-current PWM system with an ultra micro-stepping controller up to 1/128 step. Ultra micro-stepping from full-step to 1/128 stepCondenser for noise reductionThermal Shutdown Circuit (TSD) and Overcurrent Protection (OCP).
The NCP1014GTGEVB Green point(TM) reference design board has ...
Description:
The NCP1014GTGEVB Green point(TM) reference design board has been specifically designed to meet the > 0.7 power factor requirements of residential Energy Star(R) LED Luminaries without the addition of extra circuitry. This makes the driver an ideal candidate for products such as portable desk lamps, step lights, and under cabinet ...
Description:
VCCmax = 36 V, IOmax = 2.5 A2) (between OUT_A and B, between OUT_C and D)24 V Applications Recommended (VCC = 9∼32 V Max)Rotation of the Motor is Controlled by a Single Pulse Signal, which is Advantageous for Smooth Driving (Micro−step) and Rotating at High Speed Rotation4 Patterns can be ...