The Xylem Jabsco utility pump is a self-priming, electrically operated pump has a maximum flow rate of 35L/minute. It is used for a huge range of applications such as transfer, tank emptying, drainage, sump pumping, wastewater. It has nitrile oil resistant impellers fitted as standard. However, a variant with neoprene high-pressure impellers is also available.

Service kits include:
Impeller, mechanical shaft seal, O-ring, and 4 bolts for impeller end cover.

Caution:
Do not pump gasoline, diesel, solvents, thinners, or other flammable liquids
Not suitable for use in an explosive atmosphere

Supply voltage is between 230VAC
Input power is 300W
Rapid self-priming up to 3m vertical lift
Will handle hard and soft solids
Can pump up to 90% entrained air
10 minute dry running protection
Light, compact, portable, and tough
Fitted with thermal overload cut-out
33LPM and 80LPM models fitted with continuously rated motors
316 stainless steel shafts with carbon / ceramic mechanical seals
Will pump liquids with viscosity less than 150cP
Quick and easy to maintain

IP54 rated