11, Single-Sided Plain Copper Ink Resist Board FR2 With 35μm Copper Thick, 100 x 100 x 1.6mm

  • RS Stock No. 453-9035
  • Mfr. Part No. 11
  • Brand Sunhayato
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

Copper-Clad Laminated Sheet (cut board)

Paper phenol (FR-1) and glass epoxy (FR-4) provided for general-purpose raw boards

Specifications
Attribute Value
Base Material Synthetic Resin Bonded Paper
Number of Sides 1
Dimensions 100 x 100 x 1.6mm
Copper Thickness 35µm
FR Material Grade FR1
Length 100mm
Thickness 1.6mm
Width 100mm
42 In stock - FREE next working day delivery available
80 available from Europe for delivery within 5 working day(s).
Price Each
£ 1.30
(exc. VAT)
£ 1.56
(inc. VAT)
Units
Per unit
1 - 24
£1.30
25 +
£1.26
Related Products
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 ...
Quadratic soldering islands reduce risk of lifting during ...
Description:
Quadratic soldering islands reduce risk of lifting during soldering. Simple connections to adjacent soldering islands can also be made. An earth screen on the component side provides maximum shielding. Plug connectors compliant with DIN 41612, types B and C up to 96 contacts, can be mounted on both sides of ...
Microtrak FR4 epoxy glass laminates are dip coated ...
Description:
Microtrak FR4 epoxy glass laminates are dip coated with a high resolution positive working Photoresist. The Photoresist contains a dye which gives a good contrast against the copper, allowing boards to be easily inspected at the developing stage. Panels are protected by a specially designed light-proof blue film which allows ...
Microtrak FR4 epoxy glass laminates are dip coated ...
Description:
Microtrak FR4 epoxy glass laminates are dip coated with a high resolution positive working Photoresist. The Photoresist contains a dye which gives a good contrast against the copper, allowing boards to be easily inspected at the developing stage. Panels are protected by a specially designed light-proof blue film which allows ...