MPN

Telemecanique Sensors Diffuse Photoelectric Sensor, Barrel Sensor, 600 mm Detection Range

RS Stock No.:: 283-533
Distrelec Article No.:: 303-04-415
Mfr. Part No.:: XUB5BPANL2
Brand:: Telemecanique Sensors

Telemecanique Sensors Diffuse Photoelectric Sensor, Barrel Sensor, 600 mm Detection Range

Subtotal (1 unit)*

£85.11

(exc. VAT)

£102.13

(inc. VAT)

FREE delivery for orders over £50.00

Last RS stock

Final 4 unit(s), ready to ship

Units	Per unit
1 +	£85.11

*price indicative

RS Stock No.:: 283-533
Distrelec Article No.:: 303-04-415
Mfr. Part No.:: XUB5BPANL2
Brand:: Telemecanique Sensors

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Telemecanique Sensors
	Sensor Style	Barrel
	Detection Type	Diffuse
	Detection Range	600 mm
	Output Type	PNP
	Electrical Connection	3 Wire Cable 2 m
	Maximum DC Voltage	24V
	Light Source	Infrared
	IP Rating	IP65, IP67
	Maximum Current	100 mA
	Response Time	<1 ms
	Minimum Operating Temperature	-25°C
	Housing Material	Nickel plated brass
	Series	XUB
	Maximum Operating Temperature	+55°C

	Select all
	Brand Telemecanique Sensors
	Sensor Style Barrel
	Detection Type Diffuse
	Detection Range 600 mm
	Output Type PNP
	Electrical Connection 3 Wire Cable 2 m
	Maximum DC Voltage 24V
	Light Source Infrared
	IP Rating IP65, IP67
	Maximum Current 100 mA
	Response Time <1 ms
	Minimum Operating Temperature -25°C
	Housing Material Nickel plated brass
	Series XUB
	Maximum Operating Temperature +55°C

Telemecanique XU range photoelectric Sensors (M18 Cylindrical).

Telemecanique OsiSense XU Photoelectric sensors provide you everything you require from photoelectric proximity sensors for applications within material handling to food and beverage industries. Various functions are available, diffuse mode, (BGS) Background suppression, polarize reflex, laser reflex and through-beam and through beam. The UX range further is available in 4 internationally recognised formats:

General purpose. Lasers. Forks and frames. Specific application sensors.

How do they work and where can I use them?

An OsiSense Photoelectric has a light beam transmitter (light-emitting diode, LED) and a light-sensitive receiver (photo-transistor). A light-emitting diode is an electronic semi-conductor component emitting light when electric current flows through it. The light can be visible or invisible, depending on the transmission wavelength.

An object is detected when it enters the transmitted light beam and, in so doing, affects the intensity of the light at the receiver.

Depending on the model and application requirements, the transmission beam is either non-visible infrared or ultraviolet (for detection of luminescent materials). It may also be a visible red or green (for colour mark reading etc.) and laser red (for long sensing distance and short focal length).

The advantage of LEDs is their very fast response. To render the system insensitive to ambient light, the current flowing through the LED is modulated to produce a pulsed light transmission. Only the pulsed signal will be used by the photo-transistor and processed to control the load.

Photelectric Sensor Systems Available.

Through-Beam or Multimode (set in through-beam mode).

Longer sensing distance – (up to 100 m – XUBL line).

Precise detection with high repeat accuracy.

Not affected by colour or position angle.

Good resistance to difficult environments – example- dust, dirt.

When using several sensors ensure the sensors do not disrupt each other.

Polarised Reflex system or Multimode (with reflector accessory).

Medium sensing distance – (up to 15 m).

Precise detection.

Only one unit wired.

No effect on detection by colour or position angle.

Visible Red beam transmission.

When using several sensors ensure the sensors do not disrupt each other.

Multimode sensor (with reflector accessory).

Easy alignment. 3 LEDs providing set-up assistance.Anti-interferance function (2 sensors can be used with no alignment precautions). Semi-transparent objects detected by using teach mode function.

Diffuse System or Multimode.

Short sensing distance. Only one unit to be wired.

Easy to use. Fast response. Low cost.

Sensitive to background colours and the working environment (dirt, dust).

When using several sensors ensure the sensors do not disrupt each other.

Optical Forks.

Made from metal a strong and sturdy sensor suitable for packaging and conveying applications with label detection. No alignment needed in through-beam mode.

Only one connection needed. LEDs. Adjustable or fixed. Detect small parts – minimum size detected to 0.05 mm.

High switching frequency from 4 kHz to 25 kHz. – excellent for higher operating rates.

Note

Diameter 18 mm, Length 76 mm, Weight 0.055 Kg

Standards

CE, CSA, UL, IP67 double insulation conforming to IEC 60529, IP65 double insulation conforming to IEC 60529, IEC 60068-2-6, IEC 60068-2-27.

Be the first to know about our latest products and services

Join our mailing list today:

The personal information you provide to us when signing up to the mailing list will be processed in line with our privacy policy.