OSI Optoelectronics, OSD5-0 IR Si Photodiode, Through Hole TO-5
- RS Stock No.:
- 183-7120
- Mfr. Part No.:
- OSD5-0
- Brand:
- OSI Optoelectronics
Bulk discount available
Subtotal (1 tray of 10 units)*
£175.77
(exc. VAT)
£210.92
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- Shipping from 30 January 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit | Per Tray* |
---|---|---|
10 - 10 | £17.577 | £175.77 |
20 + | £16.927 | £169.27 |
*price indicative
- RS Stock No.:
- 183-7120
- Mfr. Part No.:
- OSD5-0
- Brand:
- OSI Optoelectronics
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | OSI Optoelectronics | |
Spectrums Detected | Infrared | |
Wavelength of Peak Sensitivity | 900nm | |
Package Type | TO-5 | |
Mounting Type | Through Hole | |
Amplifier Function | No | |
Number of Pins | 2 | |
Diode Material | Si | |
Minimum Wavelength Detected | 350nm | |
Maximum Wavelength Detected | 1100nm | |
Height | 0.13in | |
Diameter | 9.14mm | |
Peak Photo Sensitivity | 0.54A/W | |
Polarity | Reverse | |
Typical Rise Time | 8ns | |
Series | OSD | |
Select all | ||
---|---|---|
Brand OSI Optoelectronics | ||
Spectrums Detected Infrared | ||
Wavelength of Peak Sensitivity 900nm | ||
Package Type TO-5 | ||
Mounting Type Through Hole | ||
Amplifier Function No | ||
Number of Pins 2 | ||
Diode Material Si | ||
Minimum Wavelength Detected 350nm | ||
Maximum Wavelength Detected 1100nm | ||
Height 0.13in | ||
Diameter 9.14mm | ||
Peak Photo Sensitivity 0.54A/W | ||
Polarity Reverse | ||
Typical Rise Time 8ns | ||
Series OSD | ||
The Photoconductive Detector Series are suitable for high speed and high sensitivity applications. The spectral range extends from 350 to 1100 nm, making these photodiodes ideal for visible and near IR applications, including such AC applications as detection of pulsed LASER sources, LEDs, or chopped light.To achieve high speeds, these detectors should be reverse biased. Typical response times from 10 ns to 250 ns can be achieved with a 10V reverse bias, for example. When a reverse bias is applied, capacitance decreases (as seen in the figure below) corresponding directly to an increase in speed. As indicated in the specification table, the reverse bias should not exceed 30 volts. Higher bias voltages will result in permanent damage to the detector.Since a reverse bias generates additional dark current, the noise in the device will also increase with applied bias. For lower noise detectors, the Photovoltaic Series should be considered.
High Speed Response
Low Capacitance
Low Dark Current
Wide Dynamic Range
High Responsivity
APPLICATIONS
Pulse Detectors
Optical Communications
Bar Code Readers
Optical Remote Control
Medical Equipment
High Speed Photometry
Low Capacitance
Low Dark Current
Wide Dynamic Range
High Responsivity
APPLICATIONS
Pulse Detectors
Optical Communications
Bar Code Readers
Optical Remote Control
Medical Equipment
High Speed Photometry