Weidmüller, OMNIMATE SL 5.08mm Pitch, 10 Way PCB Terminal Block

  • RS Stock No. 172-2954
  • Mfr. Part No. SL-SMT 5.08HC/10/90G 3.2SN BK BX - 1780260000
  • Brand Weidmüller
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Horizontal Closed Ends, SMT Headers

These SL-SMT series 5.08mm pitch Omnimate headers have a 3.2mm pin length and a high temperature body material making them suitable for Wave or Reflow soldering. This enable these Through Hole Reflow (THR) connectors to be used on appropriately designed Surface Mount Technology (SMT) boards.

Note

For mating cable mount terminals see typical stock numbers 733-0777 for Screw type or 733-0828 for Rising Clamp type or 733-0878 for Tension Clamp Screwless type.

5.08mm Pitch -Weidmüller Omnimate Range

Weidmüller's Omnimate Range of 5.08mm pitch Two Part connectors allows wire-to-board connections through terminals using Leaf Spring and Spring Rising Clamp screw technology, or Tension Clamp and Push In screwless technology. The Weidmuller 8 Way Clamp Rising Terminal is suitable for a wide range of PCB design and connector uses.

• The PCB hole has a diameter of 1.3mm
• Screw clamp types accept wire up to 1.5mm²
• Tension clamp and IDC (screwless) options enable fast assembly times
• Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
• Polarising pins prevent mismatch connections.

Specifications
Attribute Value
Number of Contacts 10
Pitch 5.08mm
Number of Rows 1
Mounting Type Through Hole
Termination Method Solder
Type Wire to Board
Current Rating 19A
Body Orientation Right Angle
Voltage Rating 400 V
Series OMNIMATE SL
Available to back order for despatch 12/11/2020
Price Each (In a Box of 50)
£ 0.968
(exc. VAT)
£ 1.162
(inc. VAT)
Units
Per unit
Per Box*
50 +
£0.968
£48.40
*price indicative
Related Products
Socket connector screw terminals use a leaf-spring wire ...
Description:
Socket connector screw terminals use a leaf-spring wire connection system to prevent the clamping screw digging into the cable and damaging individual strands. • Rated at 8 A / 250 V ac• Wire size 0.5 – 1.5 mm²• Female plugs provide space for labelling. Cable Mount Screw Terminals. 5.08mm Pitch ...
LM Series screw clamp terminals extend cost saving ...
Description:
LM Series screw clamp terminals extend cost saving and space saving requirements on printed circuit boards. The terminals feature a proven clamping yoke connection. • Small and compact in size• Faster speed of assembly• Accepts up to 1.5 mm² (28-16 AWG) conductors• 2 and 3 way models are single height ...
These Socket Connector Push-In Screwless terminals on a ...
Description:
These Socket Connector Push-In Screwless terminals on a 5.08mm pitch give rapid insertion of prepared cables without the use of any tools also the release latch allows rapid unplugging. • The PCB hole has a diameter of 1.3mm • Screw clamp types accept wire up to 1.5mm²• Tension clamp and ...
Socket connector screw terminals use a leaf-spring wire ...
Description:
Socket connector screw terminals use a leaf-spring wire connection system to prevent the clamping screw digging into the cable and damaging individual strands. • Rated at 8 A / 250 V ac• Wire size 0.5 – 1.5 mm²• Female plugs provide space for labelling. Cable Mount Screw Terminals. 5.08mm Pitch ...