MC33204DTBR2G onsemi, Low Voltage, Op Amp, RRIO, 2.2MHz, 1.8 → 12 V, 14-Pin TSSOP

RS Stock No.:: 787-8392
Mfr. Part No.:: MC33204DTBR2G
Brand:: onsemi

MC33204DTBR2G onsemi, Low Voltage, Op Amp, RRIO, 2.2MHz, 1.8 → 12 V, 14-Pin TSSOP

Available to back order for despatch 31/10/2024

Price Each (On a Tape of 5)

£0.904

(exc. VAT)

£1.085

(inc. VAT)

Units	Per unit	Per Tape*
5 - 5	£0.904	£4.52
10 - 95	£0.762	£3.81
100 - 495	£0.518	£2.59
500 - 995	£0.49	£2.45
1000 +	£0.39	£1.95

*price indicative

RS Stock No.:: 787-8392
Mfr. Part No.:: MC33204DTBR2G
Brand:: onsemi

Technical Reference

Legislation and Compliance

Product Details

MC33201/2/4, NCV33202/4, 12V Low Noise, Rail-to-Rail I/O, High Output Drive, Operational Amplifiers, ON Semiconductor

The ON Semiconductor MC33201/2/4, NCV33202/4 Op Amps provide rail-to-rail operation on both the input and output. Drive inputs as high as 200 mV beyond the supply rails without phase reversal on the outputs, and the output can swing within 50 mV of each rail. This rail-to-rail operation enables you to make full use of the supply voltage range available.

Output current boosting techniques provide a high output current capability while keeping the drain current of the amplifier to a minimum. Low noise and distortion with a high slew rate and drive capability make them ideal for audio applications.

Low Voltage, Single Supply Operation (+1.8 V and Ground to +12 V and Ground)
Input Voltage Range Includes both Supply Rails
Output Voltage Swings within 50 mV of both Rails
No Phase Reversal on the Output for Over-driven Input Signals
High Output Current (ISC = 80 mA, Typical)
Low Supply Current (ID = 0.9 mA, Typical)
600 W Output Drive Capability
Typical Gain Bandwidth Product = 2.2 MHz

Operational Amplifiers, ON Semiconductor

Specifications

Attribute	Value
Amplifier Type	Low Voltage
Mounting Type	Surface Mount
Package Type	TSSOP
Power Supply Type	Single
Number of Channels per Chip	4
Pin Count	14
Typical Single Supply Voltage	1.8 → 12 V
Typical Gain Bandwidth Product	2.2MHz
Typical Slew Rate	1V/µs
Maximum Operating Temperature	+105 °C
Minimum Operating Temperature	-40 °C
Typical Voltage Gain	109.5 dB
Rail to Rail	Rail to Rail Input/Output
Length	5.1mm
Height	1.05mm
Width	4.5mm
Dimensions	5.1 x 4.5 x 1.05mm
Typical Input Voltage Noise Density	25nV/√Hz