LM158JGB Texas Instruments, Op Amp, 700kHz, 3 → 32 V, 8-Pin CDIP
- RS Stock No.:
- 732-0708
- Mfr. Part No.:
- LM158JGB
- Brand:
- Texas Instruments
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
- RS Stock No.:
- 732-0708
- Mfr. Part No.:
- LM158JGB
- Brand:
- Texas Instruments
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Texas Instruments | |
| Mounting Type | Through Hole | |
| Package Type | CDIP | |
| Power Supply Type | Dual, Single | |
| Number of Channels per Chip | 2 | |
| Pin Count | 8 | |
| Typical Single Supply Voltage | 3 → 32 V | |
| Typical Gain Bandwidth Product | 700kHz | |
| Typical Dual Supply Voltage | ±1.5 → ±16V | |
| Typical Slew Rate | 0.3V/µs | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Temperature | -55 °C | |
| Typical Voltage Gain | 100 dB | |
| Rail to Rail | No | |
| Typical Input Voltage Noise Density | 40nV/√Hz | |
| Length | 10.16mm | |
| Width | 7.11mm | |
| Height | 4.57mm | |
| Dimensions | 10.16 x 7.11 x 4.57mm | |
Select all | ||
|---|---|---|
Brand Texas Instruments | ||
Mounting Type Through Hole | ||
Package Type CDIP | ||
Power Supply Type Dual, Single | ||
Number of Channels per Chip 2 | ||
Pin Count 8 | ||
Typical Single Supply Voltage 3 → 32 V | ||
Typical Gain Bandwidth Product 700kHz | ||
Typical Dual Supply Voltage ±1.5 → ±16V | ||
Typical Slew Rate 0.3V/µs | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Temperature -55 °C | ||
Typical Voltage Gain 100 dB | ||
Rail to Rail No | ||
Typical Input Voltage Noise Density 40nV/√Hz | ||
Length 10.16mm | ||
Width 7.11mm | ||
Height 4.57mm | ||
Dimensions 10.16 x 7.11 x 4.57mm | ||
General Purpose Op Amps, LM Series
A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of both through hole and SMT packages. Many of the devices in the LM family of op-amps offer low power consumption and are able to operate with single supplies with input common mode voltages that includes ground.